2005-2009 BUICK LACROSSE
2005-2007 BUICK TERRAZA
2005-2009 CHEVROLET UPLANDER
2004 PONTIAC GRAND PRIX (GM Brake Code JL9 / J65; without Special Performance Package (WS6))
2005-2008 PONTIAC GRAND PRIX
2005-2009 PONTIAC MONTANA(2005: SV6)
2005 - 2007 SATURN RELAY
|
|
|
||||||
|
|
|
|
|
|||
|
|
|
|
|
|||
Vehicle Information Fitment:
2005-2009 BUICK ALLURE
2005-2009 BUICK LACROSSE
2005-2007 BUICK TERRAZA
2005-2009 CHEVROLET UPLANDER
2004 PONTIAC GRAND PRIX (GM Brake Code JL9 / J65; without Special Performance Package (WS6))
2005-2008 PONTIAC GRAND PRIX
2005-2009 PONTIAC MONTANA(2005: SV6)
2005 - 2007 SATURN RELAY
Package Include:
Front Pair Brake Calipers (Driver and Passenger side)
Steps to replace a brake Caliper:
If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper.
1. Lift the vehicle
Use the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands.
2. Remove the tire
Use the lug wrench to remove the lug nuts and then remove the tire from the vehicle.
3. Remove the caliper mounting bolts
Use the brake caliper tool to remove the caliper mounting bolts that hold the caliper in place.
4. Remove the caliper
Once the mounting bolts are removed, gently pry the caliper off the brake rotor. Be careful not to damage the brake hose as you remove the caliper.
5. Install the new caliper
Place the new caliper over the brake rotor and secure it in place with the caliper mounting bolts. Torque the bolts to the manufacturer’s recommended specifications using a torque wrench.
6. Install the tire
Replace the tire and lug nuts, torque to spec, and then lower the vehicle off the jack stands.
7. Bleed the brake system
Use a brake bleeding kit to remove any air from the brake system. This is an important step to ensure that the brakes are working properly. Continually top up the fluid in the reservoir as you bleed the brakes.
8. Test the brakes
Once the brake caliper is installed and the brake system has been bled, test the brakes to ensure they are functioning properly.

Construction of Brake Calipers:
1:Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor.
2:Pistons: These are cylindrical components located inside the caliper housing. When hydraulic pressure is applied, the pistons extend outward to push the brake pads against the rotor.
3:Seals and Dust Boots: These ensure a tight and reliable seal around the pistons, protecting them from dirt and contaminants. Proper seals are vital to prevent brake fluid leaks and maintain hydraulic pressure.
4:Brake Pad Clips: These clips securely hold the brake pads within the caliper.
5: Bleeder Screw: A small screw used to release air and excess brake fluid from the caliper during brake bleeding procedures.
Different Types of Brake Calipers:
1:Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
2:Fixed Calipers: Fixed calipers have pistons on both sides of the rotor, providing more even pressure distribution and improved braking performance. Unlike floating calipers, fixed calipers do not slide; they remain stationary during braking. This design reduces caliper flexing and ensures a more consistent brake pad-to-rotor contact.
3:Sliding Calipers: Sliding calipers are also known as pin-slide calipers. They have one or two pistons on one side of the rotor, similar to floating calipers. However, sliding calipers use pins or sliders to allow the caliper to move back and forth slightly during braking. This design helps equalize pressure on both sides of the rotor and promotes even brake pad wear.
| Item Specifics | |
|---|---|
| Brand : | app_autoparts |
| Manufacturer Part Number : | AUS84559901S |
| Placement on Vehicle : | Left,Right,Front |
| Warranty : | 1 Year |
| Custom Bundle : | Yes |
| Fitment Type : | Direct Replacement |
| Mounting Hardware Included : | Yes |
| Listing Include : | 2PCS Brake Calipers Set |
| Features : | Positive Mold Technology |
| Copper Washers Included : | Yes |
| Mounting Hardware : | Yes |
| Brake Bracket Included : | Yes |
| Grade Description : | Premium |
| Finish : | Zinc Plated |
| OE/OEM Part Number : | 18B5034;18B5035 Brake Calipers replacement |
| Bleeder Port Size : | M10x1.5 |
| Inlet Port Size : | M10x1.0 |
| Piston Material : | Iron |
| Type : | Brake Calipers & Bracket |
| Banjo Bolt Included : | Yes |
| Material : | High Quality Cast Iron |
| Brake Piston Count : | 1 |
| Piston Size(mm) : | 63 |

2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
1. Orders processed within 24 hours of payment verification.
2. We accept all ebay payment
3. The images shown are not the actual item and are for your reference only.
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1.We stand behind every product we sell.
2.All of our brand new items come with a 30-Days money-back guarantee.
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
2PCS Front Disc Brake Calipers w/ Bracket For 2005-2009 BUICK LACROSSE
Vehicle Information Fitment: 2005-2009 BUICK ALLURE 2005-2009 BUICK LACROSSE 2005-2007 BUICK TERRAZA 2005-2009 CHEVROLET UPLANDER 2004 PONTIAC GRAND PRIX (GM Brake Code JL9 / J65; without Special Performance Package (WS6)) 2005-2008 PONTIAC GRAND PRIX 2005-2009 PONTIAC MONTANA(2005: SV6) 2005 - 2007 SATURN RELAY
Package Include:
Front Pair Brake Calipers (Driver and Passenger side)
Steps to replace a brake Caliper:
If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper.
Construction of Brake Calipers: 1:Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor. Different Types of Brake Calipers: 1:Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
![]() 1.We accept multiple payment methods.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
Copyright of app_autoparts. All rights reserved. |
Shop Category Picture
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
