| 2pcs Front ABS Wheel Speed Sensor Kit For 2011-2014 Dodge Charger 3.6L |
| Product Information Introduction: |
|
|
To install a car ABS, the following steps need to be followed: 2. Installation point of positioning sensor: ABS systems usually require sensors to be installed on the wheels of the vehicle. Determine the installation location of the sensor according to the installation instructions provided by the vehicle manufacturer. 3. Install the sensor: Fix the sensor on the wheel hub and ensure that the installation position is correct, and there is no collision or obstruction between the sensor and the wheel. 4. Connect the sensor: Use the correct wiring harness to connect the sensor and ABS controller. Ensure that the wiring harness is securely connected and installed correctly, avoiding interference from heat sources, moving parts, or sharp edges. 5. Install ABS controller: Install the ABS controller in the appropriate position on the vehicle according to the installation instructions provided by the vehicle manufacturer. Usually, the controller is installed in a safe area inside the engine compartment or cabin of the vehicle. 6. Install valve body: According to the instructions of the vehicle manufacturer, correctly install the ABS valve body on the vehicle brake system pipeline and ensure that the connection is tight. 7. Connect the wiring harness: Connect the wiring harness of the ABS controller and sensor, ensure that the connection is correct, the wiring harness is not twisted, and use insulation tape or wiring harness to fix the wiring harness. 8. Complete installation: After installation, carefully inspect all connections and fasteners. Ensure that the circuit is not loose or tripped, and eliminate any potential safety risks. 9. System testing: Start the vehicle manually for a simple test to ensure that there are no abnormal sounds or warning indications in the ABS system. Subsequently, small-scale low-speed and medium speed tests will be conducted in a safe environment to verify the normal functionality and performance of the ABS system. 10. Commissioning and calibration: during installation and testing, debug and calibrate the sensors and controllers of the ABS system to ensure the accuracy and reliability of the system.
Matters needing attention: 1.The installation of ABS system should be carried out by professional technicians to ensure correct installation and good performance. 2.During the installation process, it is essential to carefully read and follow the installation instructions and operation manual provided by the vehicle manufacturer. 3.When testing the ABS system, please ensure the safety of the surrounding environment to avoid accidents. 4.If you are not familiar with the installation and debugging of ABS system, please seek professional technical support or consultation. |
| Please note that before purchasing the product, please verify the vehicle model and product appearance(Especially important parts) |
| Suitable vehicle models for the product: | |||
|
ABS
abs
abs module
abs sensor
abs control module
abs pump
abs sorber
abs wheel sensor
VSS151,
970013,
64190011,
AB1012,
5S12836,
06S880,
V33720091,
2ABS2659,
ALS2248,
SEN2ABS2659,
532700SB,
SK970013,
4779639AD,
4779639AD,
1802559045,
532700,
ABSB10014,
970013,
4779639AB,
2ABS2659,
SU14249,
V33720091,
AB1012,
4779639AD,
SU14249,
SU14249,
ARA1017,
AB1012,
2411015,
4779639AA,
970013,
412902,
31819,
VSS151,
AB1012,
532700SB,
970013,
ABS2332,
VSS151,
5S12836,
ALS2248T,
4779639AB,
7211043,
4779639AB,
WSS1W019,
| |||
|
2011 - 2014 Dodge Challenger 3.6L ABS Wheel Speed Sensor Kit 2011 - 2014 Dodge Challenger 5.7L ABS Wheel Speed Sensor Kit |
2011 - 2014 Dodge Challenger 6.4L ABS Wheel Speed Sensor Kit 2011 - 2014 Dodge Charger 3.6L ABS Wheel Speed Sensor Kit |
|
2011 - 2014 Dodge Charger 5.7L ABS Wheel Speed Sensor Kit 2013 - 2014 Dodge Charger 6.4L ABS Wheel Speed Sensor Kit |
| Product testing data: |
|
1.Resistance Check 2.Inductance Check 3.Insulation Resistance 4.Salt Spray Test 5.Extreme Heat Age Test 6.Thermal Cycle with Vibration Test |
| Shipping situation: |
|
1.Free shipping within the United States. 2.Delivery time: One working day. 3.Shipping time: Standard mail takes 5-10 days. 4.Other courier services: DHL and FedEx. 5.We will ship the package to your eBay address. Please verify the shipping address before placing an order. |
| Return details: |
|
1.If the product is damaged (upon arrival), we guarantee that the customer will exchange the goods and receive a refund within 30 working days after receiving them, without external force. 2.The warranty does not cover normal product lifespan wear, tear, or abuse. 3.The warranty does not apply to situations caused by misuse, abuse, negligence, accidents, improper use, improper installation or modification. 4.For faulty products within the warranty period, please contact our customer service via eBay message. 5.If you have any questions, you can contact us through eBay messages. 6.If the product is damaged or lost, please contact us. Do not directly click "return this item", as this will cause many problems for both parties and take a long time. So please make a return or exchange after sufficient communication. |
| Contact us: |
|
1.If you have any questions, please do not hesitate to contact us! 2.We will reply to your question within 1 working day, except for holidays and weekends! |
