- Vehicle Location : Liftgate
- Extended Length [in] : 20.16"
- Compressed Length [in] : 13.00“
- Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes
- Twin Tube internal construction-Premium gas-charged cylinders
- Direct fit,Ensures easy installation and precise operation
- Individually tested for performance and reliability
- Brand new and warranty offered!!!
|
|
|
||||||
|
|
|
|
|
|||
Item Description??
- Vehicle Location : Liftgate
- Extended Length [in] : 20.16"
- Compressed Length [in] : 13.00“
- Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes
- Twin Tube internal construction-Premium gas-charged cylinders
- Direct fit,Ensures easy installation and precise operation
- Individually tested for performance and reliability
- Brand new and warranty offered!!!
This Listing is for 2 Supports which fit the Following Applications??
2008-2013 Toyota Highlander
-With Power Liftgate (Brackets Not Included)
How to Properly Install a standard Lift support??

1. Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.
2. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.
3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.
4. To install the new supports do the same procedure in reverse. DO NOT jam the new support end over the ball socket without lifting the U band slightly or damage may occur.
5. Lift Supports need to be installed fully extended. In most cases you just can't compress them unless they are on the vehicle. If you have any issues during the installation PLEASE contact us. Never force a support.
6. If the ends are not lining up the support may need to be turned. To do this attach the shaft end of the support to the vehicle and then turn the entire body of the support clockwise unit the ends line up.
Important Notes about Lift Supports??
1. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification,please ensure you replace all the supports in the compartment at the same time to ensure proper performance.
2. Lift supports loose pressure over time,even sitting on shelves in most auto parts stores and many of the inventory liquidators on . Our business is lift supports,and we make sure to sell newly produced units,keeping our inventory fresh and rotated.
| Item Specifics | |
|---|---|
| Brand | brauchen-autoparts |
| Manufacturer Part Number | BRA116645P01 |
| Manufacturer Warranty | 1 Year |
| Placement on Vehicle | Left,Right,Rear |
| Installation position | Liftgate,Tailgate,Hatch |
| OE/OEM Part Number | 398665,SG229037Strut Gas Spring Shock |
| Extended Length | 20.16" |
| Compressed Length | 13" |
| Color | Black |
| Product Type | Gas Spring Lift Support |
| Finish | Smooth |
| Number of Pieces | 2 Pcs |
| Return Policy | 30 Days Free Return |
| OE Spec or Performance/Custom | OE Spec |
| Greasable or Sealed | Sealed |
| Material | Steel |
| Kit or Single Part | Kit |
| Modified Item | NO |
| Superseded Part Number | 398665,SG229037Strut Gas Spring Shock |
| Interchange Part Number | 398665,SG229037 |
| Fitment Type | Direct Replacement |
| Custom Bundle | Yes |
| Mounting Hardware Included | No |
| Mounting Hardware Included | No |
| Type | Liftgate |
| Features | Automatic Opening |
| Performance Part | No |
| Universal Fitment | No |
| Extended Length | 20.12 inch |
| Stroke Length | 7.87 inch |
| Pressure | 876N |
| Body End Description | Ball Socket short (metal) 3/8" |
| Shaft End Description | Ball Socket short (metal) 3/8" |
We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
- 1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
- 2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
- 3.Local pick up is not available.
- 4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
- 5.International Buyers C Please Note:
- a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
- b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.

DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US |
Shop Category Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
2x Rear Hatch Tailgate Lift Supports Gas Shocks For 2008-2013 Toyota Highlander
Item Description??
This Listing is for 2 Supports which fit the Following Applications??
2008-2013 Toyota Highlander -With Power Liftgate (Brackets Not Included)
How to Properly Install a standard Lift support??
1. Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.
2. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.
3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.
4. To install the new supports do the same procedure in reverse. DO NOT jam the new support end over the ball socket without lifting the U band slightly or damage may occur.
5. Lift Supports need to be installed fully extended. In most cases you just can't compress them unless they are on the vehicle. If you have any issues during the installation PLEASE contact us. Never force a support.
6. If the ends are not lining up the support may need to be turned. To do this attach the shaft end of the support to the vehicle and then turn the entire body of the support clockwise unit the ends line up.
Important Notes about Lift Supports??
1. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification,please ensure you replace all the supports in the compartment at the same time to ensure proper performance.
2. Lift supports loose pressure over time,even sitting on shelves in most auto parts stores and many of the inventory liquidators on . Our business is lift supports,and we make sure to sell newly produced units,keeping our inventory fresh and rotated. We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
All of our brand new items come with a 30-Days money-back guarantee.
Q: How do I pay for my purchase? All right reserved. |
||||||||||||