Fitment
For 2004-2009 Mazda 3 2.0L without Turbo
Package Contents
1 x EMTA4403 / A4402 / EM-5375 - Front Right Motor Mount
1 x EMT9222 / A4405 / 9222 / EM-9222 - Rear Motor Mount
1 x EMT9196 / A4404 / 9196 / EM-9196 - Transmission Mount
1 x EMT9632 / A4418 / 9632 / EM-5783 - Rear Torque Strut Mount
Core Functions of an Engine Mount
- Secure and Support
Anchors the heavy engine to the vehicle's frame, preventing excessive movement.
- Absorb Vibration
Uses elastic components (like rubber) to dampen the shakes produced by the running engine.
- Reduce Noise
Blocks vibrations from transferring into the cabin and steering wheel, improving comfort and quietness.
Signs You Need to Replace an Engine Mount
-
Excessive Vibration: Steering wheel and car body shake noticeably at idle
-
Loud Clunk: A "clunk" or "thud" from the engine bay when accelerating or braking
-
Engine Movement: Visibly see the engine rocking too much
-
Physical Damage: Rubber is cracked, collapsed, or leaking fluid
Installation Steps
- Prepare & Lift：Disconnect battery negative terminal. Use an engine support bar to hold the engine from the oil pan (place a wood block in between)
-
Remove Old Mount：Jack up the front of the vehicle slightly. Loosen and remove the bolts securing the engine mount
-
Replace Mount：Slowly lower the engine support until the old mount is loose. Remove the old mount and install the new one
-
Install & Tighten：Slightly raise the engine to align. Tighten all bolts to the specified torque
-
Finish Up：Remove the engine support and jack. Reconnect the battery
Important Note
- The engine is very heavy.Improper operation can cause serious injury or vehicle damage
- If you lack experience, proper tools, and strength, it is highly recommended to have a professional mechanic do it
- Always work on a flat, solid surface and use jack stands to support the vehicle. Never rely solely on a jack
| Item Specifics | |
|---|---|
| Brand | everpartstorecs |
| Manufacturer Part Number | 13378791 |
| Manufacturer Warranty | 1 Year |
| Items Included | Bracket |
| Type | Engine Mount Kit |
| Number in Pack | 4 |
| Placement on Vehicle | Front Right, Rear |
| OE/OEM Part Number | A4402 A4404 A4405 A4418 |
| Material | Rubber |
| Mileage | 30000 miles |
| Country/Region of Manufacture | Unknown |
| Performance Part | No |
| Vintage Car Part | No |
| Item Height | 8 in |
| Universal Fitment | No |
| Item Width | 13 in |
| Item Length | 16 in |
| Mounting Style | Bolt-On |
| Interchange Part Number | 5375 9222 9632 9196 |
| Superseded Part Number | EM5375 EM9222 EM9632 EM9196 |
1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.
2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.
3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you
tell us the new address within 12 hours after payment
(no delivery to remote areas).
4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,
if there are any problems, contact us immediately please.
Any payments accepted by ebay also can be accepted.
1. Products can be returned for no reason within 30 days of receipt
(products to be returned must be in a resalable condition, if they have been used we will not accept the return).
2. If the product does not match the description on the product page, we will exchange or refund the product for free
within 30 days.
3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.
If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.
Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.
Shop Category |
4Pcs Transmission Motor Mount Set For Mazda 3 2.0L 2004-2009 Front Right Rear
Fitment For 2004-2009 Mazda 3 2.0L without Turbo
Package Contents
1 x EMTA4403 / A4402 / EM-5375 - Front Right Motor Mount 1 x EMT9222 / A4405 / 9222 / EM-9222 - Rear Motor Mount 1 x EMT9196 / A4404 / 9196 / EM-9196 - Transmission Mount 1 x EMT9632 / A4418 / 9632 / EM-5783 - Rear Torque Strut Mount
Core Functions of an Engine Mount
Anchors the heavy engine to the vehicle's frame, preventing excessive movement.
Uses elastic components (like rubber) to dampen the shakes produced by the running engine.
Blocks vibrations from transferring into the cabin and steering wheel, improving comfort and quietness.
Signs You Need to Replace an Engine Mount
Installation Steps
Important Note
1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.
2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.
3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you tell us the new address within 12 hours after payment (no delivery to remote areas).
4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time, if there are any problems, contact us immediately please. Any payments accepted by ebay also can be accepted. 1. Products can be returned for no reason within 30 days of receipt (products to be returned must be in a resalable condition, if they have been used we will not accept the return).
2. If the product does not match the description on the product page, we will exchange or refund the product for free within 30 days.
3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty. If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.
Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items. |
