|
|
|
|
|
|
|
|
Fitment:
Dodge Durango 2014-2020 V8 5.7L AWD Rear Left & Right with 2 Speed Transfer Case
Jeep Grand Cherokee 2014-2020 All Engine AWD Rear Left & Right
Position:
Rear Left & Right
Package Included:
1x CV Axle
The role of CV Axle
They are used to transfer power from the vehicle's transmission and differential to the wheels to propel the vehicle forward. They feature lubricated, flexible joints that allow the shaft to flex according to road conditions with minimal impact on power transmission. The joints are grease lubricated and covered with rubber boots to protect them from dust and dirt.
How to change CV Axle ?
Step1. First, make sure you have purchased a driveshaft that matches your car model.
Step2. Before starting, make sure your car's engine has cooled down and stopped running. Also, make sure your work area is tidy, spacious, and well-ventilated.
Step3. Raise the car high enough off the ground so that you can easily access where the driveshaft is. This can be done by using a jack or car lift.
Step4. Locate where the driveshaft is located, usually in the middle of the bottom of the car. It may have a protective cover that needs to be removed to access the driveshaft.
Step5. Use a suitable tool (such as a wrench) to loosen the bolt or nut on the driveshaft and carefully remove the old driveshaft from the car.
Step6. Clean the driveshaft socket and bearing housing to make sure no oil or other debris remains.
Step7. Slide the new driveshaft into the socket on the underside of the car until it reaches the proper mounting position. Be careful not to push it in forcefully to avoid damaging the drive shaft or car parts.
Step8. Use a wrench to tighten the bolt or nut on the drive shaft until it is fully seated.
Step9. Check that the drive shaft is installed correctly and that it shows no signs of looseness or damage.
Step10. Lower the vehicle back to the ground and perform a test drive to ensure the driveshaft is functioning properly. If there are any problems, please make adjustments in time.
| Item Specifics | |
|---|---|
| Brand | hilamps |
| Manufacturer Part Number | 13025844 |
| Interchange Part Number | 66-3813 |
| OE/OEM Part Number | CH-8250 |
| Superseded Part Number | 52123523AA, 52123523AB |
| Manufacturer Warranty | 1 Year |
| Type | Rear CV Axle Shaft Assembly Pair Set |
| Fitment Type | Direct Replacement |
| Items Included | N/A |
| Placement on Vehicle | Rear Left Driver Side,Rear Right Passenger Side |
| Year | 2014-2023 |
| Compatible Model | Dodge, Jeep |
| Model | Durango, Grand Cherokee |
| Engine | 3.0L, 3.6L, 5.7L, 6.2L, 6.4L |
| Note1 | 2014-2023 Dodge Durango 5.7L fit All Wheel Drive |
| Note-1 | with 2 Speed Transfer Case, with 230mm Rear Axle |
| Note2 | 2014-2017 Jeep Grand Cherokee 3.0L, 3.6L, 5.7L, 6.4L fit AWD |
| Note-2 | with 230mm Rear Axle |
| Note3 | 2018-2021 Jeep Grand Cherokee 3.0L,3.6L,5.7L,6.2L,6.4L fit AWD |
| Note-3 | with 230mm Rear Axle |
| Fitment | Verify this part fits your vehicle using the compatibility chart |
Shop Category Hot Item
Delivery
New List Item
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
AWD 2pcs CV Axle Shafts Rear fits Dodge Durango Jeep Grand Cherokee 5.7L
Fitment: Dodge Durango 2014-2020 V8 5.7L AWD Rear Left & Right with 2 Speed Transfer Case Jeep Grand Cherokee 2014-2020 All Engine AWD Rear Left & Right
Position: Package Included:
The role of CV Axle They are used to transfer power from the vehicle's transmission and differential to the wheels to propel the vehicle forward. They feature lubricated, flexible joints that allow the shaft to flex according to road conditions with minimal impact on power transmission. The joints are grease lubricated and covered with rubber boots to protect them from dust and dirt.
How to change CV Axle ? Step1. First, make sure you have purchased a driveshaft that matches your car model.
Step2. Before starting, make sure your car's engine has cooled down and stopped running. Also, make sure your work area is tidy, spacious, and well-ventilated.
Step3. Raise the car high enough off the ground so that you can easily access where the driveshaft is. This can be done by using a jack or car lift.
Step4. Locate where the driveshaft is located, usually in the middle of the bottom of the car. It may have a protective cover that needs to be removed to access the driveshaft.
Step5. Use a suitable tool (such as a wrench) to loosen the bolt or nut on the driveshaft and carefully remove the old driveshaft from the car.
Step6. Clean the driveshaft socket and bearing housing to make sure no oil or other debris remains.
Step7. Slide the new driveshaft into the socket on the underside of the car until it reaches the proper mounting position. Be careful not to push it in forcefully to avoid damaging the drive shaft or car parts.
Step8. Use a wrench to tighten the bolt or nut on the drive shaft until it is fully seated.
Step9. Check that the drive shaft is installed correctly and that it shows no signs of looseness or damage.
Step10. Lower the vehicle back to the ground and perform a test drive to ensure the driveshaft is functioning properly. If there are any problems, please make adjustments in time.
1.We accept any payment which can be accepted by eBay.
2.Please do check the shipping address. If you want to change the shipping address, please contact us by eBay messages.
3.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
4.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
2. The images shown are not the actual item and are for your reference only.
3. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer.
1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
2. It is impossible to address issues if we do not know about them!
hilamps_All rights reserved. |
