Features:
1: The base is used with a 5.6-meter pull-rod antenna, and can be switched between 14MHz-50MHz by adjusting the length of the pull-rod, which requires some hands-on skills
2: Can be adjusted with talent
3: The standard ground grid recommends using 4 3.5-meter 0.5-2.5 square soft wires, and the enhanced ground grid can be matched according to the 1/4 wavelength of the used band
for Pac-12 portable shortwave antenna only requires a basic M10 thread
Specifications:
Part name: M10 antenna base
Applicable to: for Pac-12 antenna
Color: Silver
Size: 9*3.9cm
Model: MSK-12
Pull rod interface: M10 thread
Feeder interface: M socket
Ground interface: M10 thread
Material: Aluminum alloy
Standing wave: <1.5 (ground installation matches the ground grid)
Power tolerance: 200 for watts (FT8 100 for watts)
Weight: base about 220g,
Height: about 90mm
Diameter: about 39mm (excluding M female socket)
How to use:
Connection way end connects to M10 5.6m pull rod antenna, GND end is covered with ground grid and then screwed on the ground ging into the ground, the ground grid is laid flat in 4 directions, and the base is connected with M male feeder, and the length of the pull rod is adjusted according to the band used. Please pay attention to the radio standing wave table when using (standing wave is as <1.8 as possible)
Package content:
1 x M10 antenna base adapted to for Pac-12
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
