Artnet DMX512 3D Bidirectional Network Controller 1024 Simulationlight Consol cw

juyin_17

$162

CONTACT SELLER SEE ON EBAY

juyin_17

$162

DESCRIPTION

Bidirectional New DMX512 Artnet Network Controller 3D Simulationlight Console

ArtNet DMX converter provides two-way network ArtNet to DMX512 serial bidirectional conversion capabilities, and can simultaneously output SPI signal directly drive control all kinds of points of light.High-speed ARM processor follow the standard ArtNet protocol that provides a standard RJ45 network interface and DMX512 output interface ,Suitable for the occasion lighting dimmer control cabinet and other uses .M-168-ArtNet1024 highly compatible protocol standard real-time,the bulk have been taped for television scene,outdoor LED wall,stage background screen,stable and reliable.

Features:

ArtNet to DMX converter.

Follow ArtNet/ArtNet Agreement.

Standard DMX512 signal output,40HZ/S refresh rate.

Provides configuration tools,user-friendly configuration parameter.

With network,serial transceivers instructions.

Support for third-party software,such as MADRIX,DMXWorkshop etc.

Metal housing.

Standard RJ45 network interface.

Support FreeStyle/PC-Dimmer/MagicQ etc.

SPI output signal control point source, IP address can modify.

Parameters:

Input voltage	5V DC
Working current	＜300mA
Interface	10/100M network interface,1.5KV network isolation transformer
Network data	transceiver instructions
DMX data	transmission instructions
Parameter	protection switch
Operating Temperature	0~65℃
Storage temperature	-25℃~85℃

Manually modify your computer's network card IP and IP in the box to the same network segment.

IP metaphor box factory is 192.168.1.100, mask is 255.255.255.0.

Then you must first manually configure your computer's network card IP is: 192.168.1.88.

the mask:. 255.255.255.0 (straight box and card can not be used to automatically obtain IP).

Then go to open the ART-NET testing software or application software to connect to the boxes.

As long as our test software provides read SN number, it indicates that the connection is normal.

When the test is completed using the software must be switched off! Doing so may affect the use of other software.

How to restore factory settings box it?

Methods: First, power off, press and hold the panel's RESET button and hold On power-up, this time node on the panel with two lights flashing Server, and so on for about 10 seconds.

Then release the button, the two lights flash alternately, it will restore the factory values.

Keys on the M-168 model panel can be switched during hold about 8 seconds when power work mode you can switch between node and server. Refers to the corresponding panel.

Indicator lights flash:

DmxWorkShop and MCSWE_ART-NET_Configure can MCSWE ART-NET hardware to modify IP and modify the port.

At the same time do not run two test software! Otherwise it will fill occupy!

When DmxWorkShop / MagicQ software, the system is running win7 above must be right to run as administrator, or can not be found in the hardware or find the normal output.

If your system opens the firewall settings, add the corresponding firewall software to allow name directory, or directly off the firewall. Otherwise, the software can not lose The ART-NET network signal, or the signal off!

Sat, 03 May 2025 19:54:18 GMT 638819276582860869 E8AE1AACD25286C17D66C0BFF896BA5A