AudioControl LC2i 2 Channel RCA Line Out High to Low Converter with Accubass

cen-uk

$135

CONTACT SELLER SEE ON EBAY

AudioControl LC2i 2 Channel RCA Line Out High to Low Converter with Accubass

cen-uk

$135

DESCRIPTION

AudioControl LC2i 2 Channel RCA Line Out High to Low Converter with Accubass

2 CHANNEL ACTIVE LINE OUTPUT CONVERTER WITH ACCUBASS® The LC2i allows for easy factory sound system upgrades without disturbing any factory features and functions. Adding aftermarket amplifiers and subwoofers to factory source units becomes simple. The LC2i is installed after the factory amplifier, so it can be added to any factory system. With AudioControl’s active speaker level inputs, you’ll get much better bass signal than with passive converters. AccuBASS® corrects factory bass roll-off by automatically engaging at the preset volume level, generating rock solid bass in just the right amount. Active Speaker Level Inputs AccuBASS® Bass Compensation Circuit Threshold and Boost Controls for AccuBASS® Optimization • GTOTM Signal Sense (no remote wire needed) Full Range Main Outputs Low Passed (1000 Hz) Bass Outputs 9.5 Vrms Output with Level Matching Controls Compact Size with Mounting Brackets Optional ACR-1 Dash Remote for Bass Level Control High-quality line output converter Looking for great sound from your factory radio? Would you like to upgrade your car's premium system? AudioControl's LC2i line output converter takes amplified speaker-level signals and converts them into high-quality preamp signals that can be fed to another processor or amplifier. In other words, it lets you create an awesome car audio system without disturbing your factory controls or features. Get your bass back Some factory radios dial down the bass as you turn up the volume to protect their speakers. The problem is, they don't give it back when you upgrade to a nice set of aftermarket speakers. AudioControl packs the LC2i with their AccuBASS™ circuitry that reverses the factory bass rolloff, giving you the bass you need to enjoy your music to the fullest. Place the LC2i between your factory system and your bass amp, and you'll hear a huge difference in bass response. High-voltage signal for great sound Some premium systems use multi-wire speaker cables for systems with multiple speakers. The LC2i features two speaker-level inputs that let you connect amplified signals up to 400 watts, including cables from Bose® and other premium factory systems. The LC2i then sends out a high-powered preamp signal — up to 9.5 volts RMS — that helps every amp perform to its maximum ability. Convenience The optional dash-mount remote control allows you to adjust the level of your sub channel on the go. The speaker-level inputs sense incoming signals and turn on the LC2i, while a built-in 12-volt trigger tells your amps or other gear to turn on when you start your car.

CEN

Free UK Mainland Delivery

AudioControl LC2i 2 Channel RCA Line Out High to Low Converter with Accubass

Free UK

Mainland Delivery

Hassle Free

30 Day Returns

Trusted for More

Than a Decade

Premium Products

from Top Brands

Product Description

2 CHANNEL ACTIVE LINE OUTPUT CONVERTER WITH ACCUBASS®

The LC2i allows for easy factory sound system upgrades without disturbing any factory features and functions. Adding aftermarket amplifiers and subwoofers to factory source units becomes simple. The LC2i is installed after the factory amplifier, so it can be added to any factory system. With AudioControl’s active speaker level inputs, you’ll get much better bass signal than with passive converters. AccuBASS® corrects factory bass roll-off by automatically engaging at the preset volume level, generating rock solid bass in just the right amount.

Active Speaker Level Inputs
AccuBASS® Bass Compensation Circuit
Threshold and Boost Controls for AccuBASS® Optimization • GTOTM Signal Sense (no remote wire needed)
Full Range Main Outputs
Low Passed (1000 Hz) Bass Outputs
9.5 Vrms Output with Level Matching Controls
Compact Size with Mounting Brackets
Optional ACR-1 Dash Remote for Bass Level Control

High-quality line output converter

Looking for great sound from your factory radio? Would you like to upgrade your car's premium system? AudioControl's LC2i line output converter takes amplified speaker-level signals and converts them into high-quality preamp signals that can be fed to another processor or amplifier. In other words, it lets you create an awesome car audio system without disturbing your factory controls or features.

Get your bass back

Some factory radios dial down the bass as you turn up the volume to protect their speakers. The problem is, they don't give it back when you upgrade to a nice set of aftermarket speakers. AudioControl packs the LC2i with their AccuBASS™ circuitry that reverses the factory bass rolloff, giving you the bass you need to enjoy your music to the fullest. Place the LC2i between your factory system and your bass amp, and you'll hear a huge difference in bass response.

High-voltage signal for great sound

Some premium systems use multi-wire speaker cables for systems with multiple speakers. The LC2i features two speaker-level inputs that let you connect amplified signals up to 400 watts, including cables from Bose® and other premium factory systems. The LC2i then sends out a high-powered preamp signal — up to 9.5 volts RMS — that helps every amp perform to its maximum ability.

Convenience

The optional dash-mount remote control allows you to adjust the level of your sub channel on the go. The speaker-level inputs sense incoming signals and turn on the LC2i, while a built-in 12-volt trigger tells your amps or other gear to turn on when you start your car.

Specification

Speaker Level Input: 1 (2 channels)
Maximum Speaker Level Input: 400W per channel at 4Ω
Input Impedance: 20kΩ
Preamp Outputs: 2 (2 channels main, 2 channels bass)
Maximum Output Level: 9.5Vrms/13V peak
Output Impedance: 150Ω
Total Harmonic Distortion: 0.01%
Signal to Noise: >110 dB
Frequency Response: 33 Hz – 100 kHz ±1 dB
Remote In
12VDC Remote Out (always active when unit is on)
Current Draw: 150mA
Recommended Fuse Rating: 1A
weights & dimensions
Dimensions: 5.4″L x 3.25″D x 1.5″H (6.5″L including mounting brackets)
Weight: 1.0lbs (0.5kg)

What's included

LC2i
Speaker and Power connectors
Manual

Delivery

Orders received before 2pm are usually shipped same day.

We offer free UK mainland delivery on every product we sell, but if you want it fast choose the Express next working day delivery option at checkout.

Express next working day delivery is for UK Mainland orders only, otherwise its a 2 working day service.

We ship normal working days, Monday to Friday, except weekends, bank holidays and public holidays. Unfortunately we do not offer Saturday delivery.

Northern Ireland, Scottish Highlands, Scottish Islands, Isle of Man, Isle of Wight & Scilly Isles additional delivery charges on all orders may apply.

Returns

1. This policy sets out the returns policy for goods or services purchased through the online store operated by CEN UK LTD.

2. To be eligible for a return, your item must be unused and in the same condition that you received it, and it must be in the original packaging.

3. By visiting our website and/or purchasing something from us, you are deemed to have accepted these terms and conditions.

4. Other types of services cannot be returned for a refund, for example where the service begins as soon as you make the payment (e.g. a downloadable software product) or a software, voucher codes, gift cards or gift wrapping service.

5. Under the Consumer Contracts Regulations, if you change your mind about a purchase you have made within 14 working days after the date of delivery, you are entitled to a full refund less our postage and packaging cost of the original purchase price for the goods you wish to return. You will not be entitled to a refund of the cost you incur in returning the item to us.

6. Our standard returns policy entitles you to a full refund of the purchase price less our postage and packaging cost if you change your mind (i.e. the goods or services provided are not faulty or were not described properly) within 14 working days.

7. If the item you purchased was faulty or did not work properly, or you think the item was not as described in the item description, please contact us first before requesting a refund as we may be able to resolve your problem to your satisfaction.

8. Where you would like to return a physical product you have purchased, please contact us to let us know that you will be returning the item. To obtain a refund for a non-physical product (like a service) please contact us for further information about how this can be done.

9. Once your return is received and inspected we'll contact you to let you know whether your refund will be processed or not, and credit your original method of payment, within a certain amount of days.

10. If you haven't received a refund yet where we have told you we have issued one, please check your bank account or card statement to make sure it hasn't been received and then contact your bank as some banks or card companies take a number of days to credit your account.

11. If an item you purchased was purchased with a discount voucher, then we will only refund the amount that you paid (and not the amount the item was listed for).

12. If an item you purchased was in a sale then it may not be eligible for a refund if you have changed your mind. If you are in any doubt please contact us before making the purchase.