Control4® ZigBee IO
Control4® ZigBee IO (C4-Z2IO, C4-Z2IO-5PK)
Open it, close it, turn it on, turn it off—all without the wire. Automating a home’s garage doors, window blinds, fireplaces, projection
screens, televisions, AV receivers, and a variety of other devices just got a lot easier to do—and in a lot less time. And all without the
wire.
Get the job done using Control4’s ZigBee IO. This easy-to-install solution can be configured to provide a combination of two relays or
up to four contact sensors. Additionally, it provides two IR outputs, one magnetic contact sensor, and one temperature and humidity
sensor, all packed into a single, small device. The ZigBee IO expands your Control4 home's automation capabilities, controlling devices
in the home theater or garage, and anywhere inside and outside the home, with standard Control4 System Remote Controls, touch
screens, or keypads.
The ZigBee IO is compact and installs easily. Discreetly placed, the ZigBee IO can provide control of a television and AV receiver using
its IR outputs or can be an excellent solution for detecting open and closed states or activating a garage door or gate.
Complete Control4 system integration—The ZigBee IO also includes an internal magnetic contact sensor that wirelessly integrates into
Control4 systems. To trigger the sensor, you can use any standard door or window sensor magnet.
A built-in temperature and humidity sensor adds remote temperature- and humidity-sensing capabilities. This gives Control4 systems
additional automation features and capabilities based on indoor or outdoor temperature events. The ZigBee IO functions appear in
Control4 Composer projects as relays, contact sensors, and IR outputs that you can trigger and monitor to control events and take
action throughout the Control4 system based on commands or other events.
Create a stronger, wider, and more robust ZigBee mesh network than ever before using the ZigBee IO. Eliminate any network “dead
spots” by increasing the reach and density of your ZigBee mesh. Improve ZigBee signal latency and provide your customers with higher
reliability and responsiveness as they use the devices connected to their ZigBee mesh network.
•
•
•
•
•
•
•
•
IR × 2 (control up to 4 IR devices)
5 contacts (4 on terminal block plus internal magnetic contact switch)
2 relays
Configurable options for contacts and relays:
•
Option 1: 2 relays (SPST)
•
Option 2: 4 contacts
•
Option 3: 1 relay (SPST), 2 contacts
•
Option 4: 1 relay – SPDT
•
Option 5: 1 relay - DPST
Temperature and humidity sensing
Internal antenna
Powered via micro USB or via terminal block with external power supply
ZigBee network range extender
Control4® ZigBee IO (C4-Z2IO , C4-Z2IO-5PK)
Specifications
Model number Control4 OS system requirements Control4 system integration Driver Networks supported ZigBee data rate ZigBee frequency range ZigBee routing table Contact sensor input Relay terminal ratings External thermistor Infrared Internal contact Integrated internal thermistor Integrated humidistat Power consumption External low-voltage power supply Available colors Dimensions (L × W × H) Weight Environmental
Paintable enclosure External thermistor C4-Z2IO (single)
C4-Z2IO-5PK (5-pack)
System requirements
OS version 2.10.0 or greater
Each installed ZigBee IO adds sensor and input connections to the Composer
project.
The ZigBee IO (C4-Z2IO) is available in the Composer Online Driver Database.
Communication
Control4 ZigBee Pro mesh networking protocol, based on the IEEE 802.15.4
ZigBee standard
250 kbps
2.405 – 2.475 GHz
32 nodes
Connections
4 inputs, accepts AWG 16-28, common ground connection
0.5A @ 50V, 1A @ 24V or less
Contact resistance: 30-40 milliohms
1 thermistor input, sold separately.
See “Available accessories” below
2 × 3.5 mm IR ports
Integrated features
Internal magnetic reed switch
Requires external magnet, sold separately
Internal thermistor can be used for local temperature sensing: 0°C to 40°C (32°F
to 104°F)
Can measure local humidity from 5% to 90%.
Power
100mA at 12V, fully active
Micro USB power supply (included)
AC/DC 5-24V (optional)
Other
Black (water-based paintable enclosure)
78.7 mm × 65.7 mm × 26.6 mm (3.1” × 2.6” × 1.05”)
70.9 grams (2.5 oz.)
Temperature:
Operational 0°C to 40°C (32°F to 104°F)
Storage -29°C to 70°C (-20°F to 158°F)
Humidity 5% to 95% non-condensing
This device is not waterproof and must be kept out of direct contact with water.
The product must not be immersed.
The cover assembly plastics are paintable with any water-based residential paints.
Do not clog the cover assembly vent holes with paint.
Available accessories
ZCA-EXT10A, AC-DOTS1-W, AC-PMT51-W
INSTALLATION GUIDE
MOST RECENT DATA SHEET
