Listing is for one camera.
Sensor was used on a robot research project and has been tested to confirm it is fully functional. CS lens is removed and may be replaced with a CS mount or 10mm lens.
Specifications
General
Type: Color Camera
Model Number: BFS-U3-16S2C-CS
Manufacturer: FLIR
Camera Series: Blackfly® S
Spectrum: Color
Physical & Mechanical Properties Dimensions (mm): 29 x 29 x 30 (excludes connectors and lens mount)
Weight (g): 36
Housing: Full
Sensor
Image Buffer: 240MB
Sensor Format: 1/2.9"
Resolution (Megapixels): 1.60
Frame Rate (fps): 226.00
Pixels (H x V): 1,440 x 1,080
Pixel Size, H x V (μm): 3.45 x 3.45
Sensing Area, H x V (mm): 4.97 x 3.73
Imaging Sensor: Sony IMX273
Type of Sensor: Progressive Scan CMOS
Shutter Type: Global
Pixel Depth: 10/12 bit
Exposure Time: 4μs - 30s
Dynamic Range (dB): 71.58
Machine Vision Standard: USB3 Vision v1.0
Electrical
Power Consumption (W): 3
Hardware & Interface Connectivity Interface: USB 3.1 Gen 1
Connector: USB 3.1 Gen 1, Micro-B with Screw Locks
Power Supply: Power over USB or via GPIO with #88-063
GPIOs: 1 opto-isolated input, 1 opto-isolated output, 1 non-isolated bi-directional, 1 non-isolated input
Synchronization: Hardware Trigger (GPIO) or Software Trigger
Interface Port Orientation: Back Panel
GPIO Connector Type: 6-pin Hirose (HR10)
Threading & Mounting
Mount: CS-Mount
Mounting Threads: ¼-20 with Tripod Mount Adapter #88-210
Environmental & Durability Factors
Operating Temperature (°C): 0 to +50
Storage Temperature (°C): -30 to +60
Regulatory Compliance
RoHS 2015: Exempt
