For BMW E46 3 Series Speedometer Instrument Cluster Clock Adjuster Repair Part
Item specifics:
Installation notes:
- Use latex gloves during installation to prevent the cluster from fingerprints
- Try not to touch the needles, or take a picture before the install, for help to set it back to position
Installation guide:
1.Remove the cluster from your car
2.Remove 4 torx screws with a T8 screwdriver from the back
3.Pull off the top, rubber black black adjuster needle
4.Remove the back of the cluster
5.Remove the black adjuster needle
6.Remove the residuals of the original, white adjuster levers with a scalpel/papercutter
7.Put the end tip of the fixture below the edge of the cluster and push down the whole fixture with your fingertips/screwdriver. Please pay attention the ring of the fixture is around the white round stuff on the cluster
8.Put back the black adjuster needle and assemble the cluster
Fitments:
For BMW E46 3 series clock adjuster repair part for all modell (1998-2006)
Package Included:
1 set
Notice:
Please don't open cases or return requests without contacting me.
If you have any questions about quality, shipping or other problems, please contact me first via eBay message.
I will give you a satisfy solution.
