Fits:
- 1993-2002 Chevrolet Camaro
- 1993-2002 Pontiac Firebird
What is an ABS Sensor?
The anti-lock braking system uses an ABS sensor or wheel sensor to monitor the wheel speed and send this information to the ABS computer. The ABS computer uses this information to prevent the brakes from locking during an emergency stop. Without ABS, a wheel will automatically lock up in slippery and/or gravel-like conditions, as well as potentially experience a loss of directional control and vehicle stability.
Where are these Sensors Located?
The ABS sensor is typically located in each wheel hub/rotor on a four channel ABS system. Some rear wheel drive applications have the sensor mounted in the rear differential.
Features:
- Built to strict quality control standards
- 100% Brand New ABS speed sensor
- Non-breakable Seismic Capacity
- Plugs into existing body mounted ABS harness
- Drop in fit for easy installation
- 1 Year Warranty
Symptoms of a Bad or Failing ABS Sensor:
- The ABS Warning Light Glows
- The Brakes Lock Up
- An Unresponsive Brake Pedal
- Increased Pedal Effort
- Speedometer Failure
If any of the warning lights above are illuminated, there is brake pedal judder while braking at low speeds or the wheels lock up while braking, then there is probably a fault somewhere within the ABS system.Please replace it immediately！
How to Replace an ABS Speed Sensor?
Materials Needed:
- Brake cleaner
- Jack stands
- Ratchet
- Sil-Glyde
- Socket set
- Wrench set
Install the ABS Speed Sensor:
Step 1: Gain access to the sensor.
Step 2: Remove the sensor.
Step 3: Take note of the sensor wire routing.
Step 4: Clean the sensor mounting hole.
Step 5: Clean the tone ring of all fine metal.
Step 6: Insert the sensor into its mounting hole.
Step 7: Route the sensor wire along the correct path.
Step 8: Connect the sensor connector to the vehicle connector.
Step 9: Clear the code and test drive your vehicle.
| Item Specifics | |
|---|---|
| Brand | everpartstorecs |
| Placement on Vehicle | Left Right Rear |
| Manufacturer Part Number | 10028457 |
| OE/OEM Part Number | 10456115 |
| Items Included | Traction Control Pressure Sensor |
| Color | Black |
| Vintage Car Part | No |
| Package Contents | 1 x ABS wheel sensor |
| Interchange Part Number | SU9806 |
| Manufacturer Warranty | 1 Year |
| Performance Part | No |
| Superseded Part Number | ALS316 |
| Universal Fitment | No |
| Package Type | Box |
| Housing Material | Plastic |
| Fitment Type | Direct Replacement |
| Terminal Quantity | 2 |
| Mounting Hardware Included | No |
| weight | 0.045 Kg |
| Finish | Polished Rust Preventative |
| Item Height | 3.5cm |
| Material | Plastic |
| Mounting Style | Snap-On |
| Width | 5.5 cm |
| Number in Pack | 1 |
| Terminal Type | Mini-Blade |
| Connector Type | Female |
| Mounting Location | Spindle |
| Connector Quantity | 1 |
| Terminal Gender | Male |
| Connector Shape | Rectangular |
| Type | Traction Control Pressure Sensor |
1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.
2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.
3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you
tell us the new address within 12 hours after payment
(no delivery to remote areas).
4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,
if there are any problems, contact us immediately please.
Any payments accepted by ebay also can be accepted.
1. Products can be returned for no reason within 30 days of receipt
(products to be returned must be in a resalable condition, if they have been used we will not accept the return).
2. If the product does not match the description on the product page, we will exchange or refund the product for free
within 30 days.
3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.
If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.
Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.
Shop Category |
For Chevrolet Camaro Pontiac 1993-02 Left Right Side Rear ABS Wheel Speed Sensor
Fits:
What is an ABS Sensor? The anti-lock braking system uses an ABS sensor or wheel sensor to monitor the wheel speed and send this information to the ABS computer. The ABS computer uses this information to prevent the brakes from locking during an emergency stop. Without ABS, a wheel will automatically lock up in slippery and/or gravel-like conditions, as well as potentially experience a loss of directional control and vehicle stability.
Where are these Sensors Located? The ABS sensor is typically located in each wheel hub/rotor on a four channel ABS system. Some rear wheel drive applications have the sensor mounted in the rear differential.
Features:
Symptoms of a Bad or Failing ABS Sensor:
If any of the warning lights above are illuminated, there is brake pedal judder while braking at low speeds or the wheels lock up while braking, then there is probably a fault somewhere within the ABS system.Please replace it immediately！
How to Replace an ABS Speed Sensor? Materials Needed:
Install the ABS Speed Sensor: Step 1: Gain access to the sensor. Step 2: Remove the sensor. Step 3: Take note of the sensor wire routing. Step 4: Clean the sensor mounting hole. Step 5: Clean the tone ring of all fine metal. Step 6: Insert the sensor into its mounting hole. Step 7: Route the sensor wire along the correct path. Step 8: Connect the sensor connector to the vehicle connector. Step 9: Clear the code and test drive your vehicle.
1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.
2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.
3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you tell us the new address within 12 hours after payment (no delivery to remote areas).
4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time, if there are any problems, contact us immediately please. Any payments accepted by ebay also can be accepted. 1. Products can be returned for no reason within 30 days of receipt (products to be returned must be in a resalable condition, if they have been used we will not accept the return).
2. If the product does not match the description on the product page, we will exchange or refund the product for free within 30 days.
3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty. If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.
Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items. |
