DESCRIPTION
Genset Controller Genset Generator Engine Controller Generator Control Module
Introduction
*The series generator set controller is used in the automation and monitoring system of a single diesel generator set to realize the automatic start/stop, data measurement, alarm protection and "three remote" functions of the generator set. The controller adopts a large-screen liquid crystal (LCD) graphic display, which can display Chinese, English and other languages, with simple operation and reliable operation.
*The series generator set controller adopts 32-bit microprocessor technology, which realizes the functions of precise measurement, fixed value adjustment, timing and threshold setting of various parameters. Most of the parameters can be adjusted from the front panel of the controller, and all parameters can be used The PC can be adjusted through the USB interface, and the PC can be adjusted and monitored through RS485. It has compact structure, simple wiring and high reliability, and can be widely used in various types of generator set automation systems.
Performance and Features
*Used for stand-alone automation, control the generator set to start and stop automatically through the remote start-up signal;
*On the basis of HGM9310MPU (CAN), mains power monitoring and mains/generator automatic switching control function (AMF) are added, especially suitable for a single-machine automation system composed of one mains and one unit.
Its main features are as follows
*Using 32-bit ARM single-chip microcomputer, the hardware integration is high, and the reliability is further improved;
*The liquid crystal display is 480x272 TFT LCD, with backlight, Chinese, English and other languages *The interface operation is optional and can be selected on site, which is convenient for factory debugging personnel to test the machine;
*The screen protection is made of hard screen acrylic material, which has better wear resistance and scratch resistance;
* Using silicone panel and buttons, the ability to adapt to the high and low temperature of the environment is stronger;
* With RS485 communication interface, the "three remote" function can be realized by using MODBUS protocol; (a controller with RS485 interface is required);
* With SMS function, when the generator set has an alarm, it can automatically send alarm information to the set 5 phone numbers, and can also control the generator set and check the generator set status through SMS; (a controllerwith a GSM interface is required);
* With CAN BUS interface, it can be connected to EFI with J1939, not only can monitor the common data of EFI (such as water temperature, oil pressure, speed, fuel consumption, etc.) speed and deceleration, etc. (a controller with CAN BUS interface is required);
*Suitable for three-phase four-wire, three-phase three-wire, single-phase two-wire, two-phase three-wire (120/240V) power supply 50/60Hz system;
* Collect and display mains/generating three-phase voltage, three-phase current, frequency, power parameters;
* Mains has the functions of overvoltage, undervoltage, overfrequency, underfrequency, phase loss, and reverse phase sequence. Power generation has functions of overvoltage, undervoltage, overfrequency, underfrequency, overcurrent, overpower, reverse power, phase loss, reverse phase sequence function;
*Three fixed analog sensors (temperature, oil pressure, fuel level);
*Two programmable analog sensors can be set as temperature or pressure or liquid level sensors;
*Precise collection of various parameters of the engine;
*Control and protection function: realize the functions of automatic start/stop, closing and opening (ATS switching) and perfect fault display protection of diesel generator sets;
*All outputs are relay outputs;
*Parameter setting function: allows users to change and set their parameters, and at the same time, it is stored in the internal FLASH memory and will not be lost when the system is powered off. Most of the parameters can be adjusted from the front panel of the controller, all parameters can be adjusted through the USB interface using a PC, and can be adjusted through the RS485 interface using a PC;
*A variety of temperature, pressure, oil level sensor curves can be used directly, and the sensor curves can be customized;
*Various starting conditions (generating frequency, speed, oil pressure) can be selected;
* The power supply range is wide DC(8~35)V, which can adapt to different starting battery voltage environment;
* With history record, real-time clock, timing switch (on once a month/week/day and can be set to load or not) functions;
* With PLC (Programmable Logic Control) function, users can realize specific functions through graphic programming;
*Users can customize the boot image and display time;
*It can be used for water pump unit, and can also be used as indicating instrument (only indicating, alarming, relay has no action);
* With maintenance function, the maintenance time can be set to the action (only warning or alarm shutdown);
*All parameters are digitally adjusted, abandoning the analog adjustment method of conventional potentiometers, and improving the reliability and stability of the whole machine;
*A rubber sealing ring is designed between the shell and the control panel, and the waterproof performance can reach IP55;
*The clamp for fixing the controller adopts metal clamp, which has excellent performance in high temperature environment;
* Modular structure design, flame retardant ABS shell, pluggable terminals, embedded installation, compact structure, easy installation;
*With cumulative operation A, B and cumulative power A, B, users can clear and re-accumulate, which is convenient for users to make statistics by themselves.
Technical parameter
Display: 4.3 inch color screen
Operation panel:Silicone
Controller language: Chinese & English & others
Switch input port: 8
Analog input port: 5
Relay output: 8
AC voltage range: (15~360)V(ph-N)
AC system: 1P2W/2P3W/3P3W/3P4W
AC frequency: 50/60Hz
Power/current detection and display: yes
Monitoring interface: RS485
Programming interface; USB/RS485
Real time clock and history: Yes
Maintenance function: yes
Timing test machine: yes
User programmable logic: yes
DC working power supply range: DC(8-35)V
Dimensions (mm): 237*172*45
Installation size (mm): 214*160
Working temperature: (-25~+70)℃
