Introducing the LAST TOOL CHANGER CAROUSEL ASSEMBLY you may ever have to buy, EVER!
CMI “Segmented” CAT40, 20 Tool Changer Assembly designed to retrofit & upgrade the HAAS VF Series Tool Changer Assembly.
Haas VF Series Machining Centers are wonderful, except the Tool Changer Carousel cracks, & breaks into worthless pieces after a crash.
Then the expensive repair and days of down time come next. There are hundreds of individual parts to reassemble after everything is cleaned and new parts arrive, count at least 5 more hours to reassemble, then another crash comes along so the nightmare starts again.
You have better things to do with your time than replacing the OEM's breakable cast aluminum tool changer carousel again and again.
This was exactly the reason CMI (Clarklake Machine, Inc.) an American family owned Michigan based precision machine shop put its 40 years of knowledge & experience behind our unique segmented design, & manufactured of the last Tool Changer Carousel you may ever have to buy, ever again!
The best part is it comes to you already fully assembled ready to bolt on right out of the box.
CMI "Segmented" CAT 40, 20 Tool Changer Carousel Assembly:
• 1 - CAT40/20 Tool Disk
• 20 - Tool changer Door Springs
• 20 - Extractor Keys
• 20 - Extractor Springs
• 40 - Extractor Fingers
• 20 - ATC Slide
• 20 - ATC Slide Cover
• 40 - Extractor Sleeves
• 40 – 6mm Heavy Duty Flat Washer
• 40 - 1/4-20 x 7/8” SHCS
• 40 - 10-32 x ¼” SHCS
• 40 - 10-32 x 3/8” BHCS
Each Tool Changer Carousel made from 6061-T6511, assembly of 20 identical segments, torque fastened side by side on a base plate. The extractor keys and fingers are made from AR235 steel. The slides & covers are made from 1008 steel. All steel parts are black oxide treated to reduce rusting. The tool changer door springs are stainless steel.
Beyond those details we designed our extractor keys, and fingers larger than the OEM’s for greater support and added a chamfer to the extractor finger at the initial point of contact to reduce long term wear.
Our “Segmented” CAT40, 20 Tool Changers have been sold more than 1000 times to very happy and satisfied customers in almost every state in the US, Canada, Mexico, Argentina, the State of Israel and so many other countries since 2009.
PLEASE NOTE: IF YOUR MACHINE IS 1995 OR OLDER IT MAY REQUIRE A 3/8 SPACER THAT WE WILL PROVIDE, JUST LET US KNOW.
I also forgot to mention that we manufacture
tool carousels that are for the 40/10 and 40/32 meaning that they are for the
Haas machines with a 40 taper tool holders with 10 and 32 positions.
