HELIX COMBO
- HELIX DSP.3S Digital High-Resolution 8-Channel DSP
- HELIX CONDUCTOR Programable DSP Remote Control
HELIX DSP.3S
- Extremely powerful 64 Bit “fixed point” Audio DSP with 1.2 billion MAC operations per second
- High Resolution audio bandwidth up to more than 40 kHz for unrivalled sound quality
- A/D and D/A signal converters from BurrBrown
- Advanced CoProcessor (ACO) for extended feature set
- Input Signal Analyzer (ISA) and InputEQ
- DSP Sound Effects (SFX) such as the “Augmented Bass Processing” which dynamically optimizes the bass response of the subwoofer, the “StageXpander” that significantly widens the stereo perspective, the “RealCenter” function, which allows a perfectly focussed sound staging for both driver and co-driver and much more
- 10 internal memory locations for sound setups
- Smart highlevel input with ADEP.3 circuit and Auto Turn-On function
- Optical (max. 96 kHz) and coaxial (max. 192 kHz) digital input in SPDIF format
- Compact, future-proof Smart Control Port (SCP)
- HEC slot for system add-ons like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
- Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
- Optimal signal path and power supply for further improved sound quality
- “Ground lift” switch to avoid ground loops
- Compact dimensions for easy integration into the vehicle
- Easiest configuration via the intuitive DSP PC-Tool V4 software
Technical data
| Inputs | 6 x RCA / Cinch
6 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Coax SPDIF (12 - 192 kHz)
1 x Remote In |
| Input sensitivity | RCA / Cinch 2 - 4 Volts
Highlevel 5 - 11 Volts |
| Outputs | 8 x RCA / Cinch
1 x Remote Out |
| Output voltage | 6 Volts |
| Frequency response | 10 Hz - 44,000 Hz |
| DSP resolution | 64 Bit |
| DSP power | 295 MHz (1.2 billion MAC operations/second) |
| Sampling rate | 96 kHz |
| DSP type | Audio signal processor |
| Signal converters | A/D: BurrBrown
D/A: BurrBrown |
| Signal-to-noise ratio digital input | 112 dB (A-weighted) |
| Signal-to-noise ratio analog input | 107 dB (A-weighted) |
| Total harmonic distortion (THD+N) digital input | < 0.0008 % |
| Total harmonic distortion (THD+N) analog input | < 0.002 % |
| IM distortion (IMD) digital input | < 0.003 % |
| IM distortion (IMD) analog input | < 0.005 % |
| Crosstalk | > 90 dB |
| Operating voltage | 9.6 - 17 Volts (max. 5 sec. down to 6 Volts) |
| Power rating | DC 12 V ⎓ 3 A max. |
| Current draw | < 450 mA |
| Max. remote output current | 500 mA |
| Additional features | HEC slot, Ground lift switch, Smart Control Port, 32 Bit CoProcessor, ADEP.3 circuit, Auto Remote switch |
| Dimensions (H x W x D) | 40 x 177 x 120 mm /
1.58 x 6.97 x 4.72” |
CONDUCTOR
Features
§ Up
to 4 individual volume menus configurable (Master, Digital, HEC/AUX, Subwoofer,
Rear Attenuation)
§ Volume
range selectable (60 dB, 24 dB, 12 dB)
§ Volume
steps selectable (1 dB steps, 0.5 dB steps)
§ Individual
color for each volume menu configurable
§ Sound
Setup selection between all 10 memory slots
§ Intuitive
Bluetooth playback control and pairing activation (only in combination with an
optional Bluetooth Extension Card)
§ 12 x
RGB-LEDs for visual feedback
§ Wide
color space with over 16 million colors
§ Brightness
and automatic dimming function configurable
§ Easy
installation
§ Flush
mount installation with Ø 40 mm hole cut-out
§ 5 m
cable harness with split connector and single connector supply
§ Optional
housing for on-dash installation available soon
§ Full
configuration and updatability through the DSP PC-Tool software
Technical data
|
|
CONDUCTOR for SCP
|
|
Housing
|
ABS housing with machined
aluminum knob
|
|
Hardware
|
Rotary encoder, 12 x RGB-LEDs
& 48 MHz ARM processorr
|
|
Connection
|
Single connector supply
through NanoFit
|
|
Cable length
|
5
m total length – split into 4.8 m connection cable + 0.2 m CONDUCTOR cable
|
|
Dimensions (Ø x H)
|
Ø
46 x 28.7 mm / Ø 1.81 x 1.13”
|
|
Installation depth
|
17
mm / 0.67"
|
