KEYENCE CORPORATION KV-N40AR PLC CPU MODULE INPUT 24 POINTS/OUTPUT 16 POINTS

suria1311

$170

CONTACT SELLER SEE ON EBAY

suria1311

$170

DESCRIPTION

KEYENCE CORPORATION KV-N40AR PLC CPU MODULE INPUT 24 POINTS/OUTPUT 16 POINTS

IFS: BOX 13H

Specifications

Model				KV-N40AR
General specifications	Power voltage			100 to 240 VAC (+10%/-15%)
	Operating ambient temperature			0 to 55°C (no freezing)^12
	Operating ambient humidity			5 to 95% RH (no condensation)^*1
	Operating environment			As little dust and corrosive gases as possible
	Noise immunity			1500 V peak-to-peak or more, pulse width 1 µs, 50 ns (by noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case
	Insulation resistance			50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case)
	Output power supply voltage			24 VDC (±10%; output capacity: 0.6 A)
	Storage temperature			-25 to +75°C
	Vibration resistance	Intermittent vibration	Frequency: 5 to 9 Hz	Amplitude: 3.5 mm^34
			Frequency: 9 to 150 Hz	Acceleration: 9.8 m/s^234
		Continuous vibration	Frequency: 5 to 9 Hz	Amplitude: 1.75 mm^34
			Frequency: 9 to 150 Hz	Acceleration: 4.9 m/s^234
	Shock resistance			Acceleration: 150 m/s², application time: 11 ms, two times in each of the X, Y, and Z directions
	Operating altitude			2000 m or less
	Overvoltage category			AC: II, DC: I
	Pollution degree			2
Performance specifications	Calculation control method			Programme storage method
	I/O control method			Refresh method
	Programming language			Expanded ladder, KV Script, mnemonic
	Number of instructions			Basic instructions: 81 kinds and 182 instructions, Application instructions: 39 kinds and 56 instructions Calculation instructions: 123 kinds and 311 instructions, Expansion instructions: 92 kinds and 141 instructions, Total: 335 kinds and 690 instructions
	Instruction execution speed			Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum
	Program capacity			16k steps
	Maximum number of attachable I/O units			8
	Maximum number of I/O points			256 (excluding the base unit I/O)
	Input relay/Output relay/Internal auxiliary relay	R		Total of 9600 points 1 bit (R000 to R59915)
	Link relay	B		8192 points 1 bit (B0 to B1FFF)
	Internal auxiliary relay	MR		9600 points 1 bit (MR000 to MR59915)
	Latch relay	LR		3200 points 1 bit (LR000 to LR19915)
	Control relay	CR		1440 points 1 bit (CR000 to CR8915)
	Timer	T		512 points 32 bits (T0 to T511)
	Counter	C		256 points 32 bits (C0 to C255)
	Data memory	DM		32768 points 16 bits (DM0 to DM32767)
	Link register	W		16384 points 16 bits (W0 to W3FFF)
	Temporary memory	TM		512 points 16 bits (TM0 to TM511)
	High-speed counter	CTH		3 points (CTH0 to CTH2) 32-bit automatic reset counter^5 (Input response: 100 kHz per single phase, 50 kHz per phase difference)^6
	High-speed counter comparator	CTC		6 points (CTC0 to CTC5) 32 bits, two points per high-speed counter
	Index register	Z		12 points 32 bits (Z01 to Z12)
	Control memory	CM		9000 points 16 bits (CM0 to CM8999)
	Base unit I/O			Input: 24 points, output: 16 points Input common: 1 point, Output common: 6 points (R type)/2 points (T/TP type)
	Number of comments and labels that can be stored in the main unit	Device comment		20000 When a maximum-length ladder programme is written with no labels.
		Label		28000 When a maximum-length ladder programme is written with no device comments.
	Power off hold function	Programme memory		Flash ROM can be rewritten 10000 times
		Device		Nonvolatile RAM^*7
	Self-diagnosis function			CPU error, RAM error, and other problems
Input specifications	Relay number			General input: R000 to R007, R014 to R107 (18 points) High-speed A-phase and B-phase input: R008 to R013 (3 channels, 6 points in total)
	Input mode			24 VDC input (open collector)
	Maximum input voltage			26.4 VDC
	Rated input voltage			24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA^*8)
	Minimum ON voltage			19 VDC
	Maximum OFF current			1.5 mA
	Common method			General input: All inputs/common (1 terminal) High-speed A-phase and B-phase input: Shared common for all points (shared with general input)
	Circuit delay time			General input: OFF to ON: Max. 30 µs (Typ. 3.5 µs), ON to OFF: Max. 50 µs (Typ. 15 µs) High-speed A-phase and B-phase input: OFF to ON: Max. 2 µs (Typ. 1.1 µs), ON to OFF: Max. 2 µs (Typ. 0.3 µs)^*9
	Input time constant			Normal: 10 ms, When the HSP instruction is used: 10 µs When CR2305 is turned ON: 10 µs to 10 ms, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.^*9
				Delay by input time constant Input time constant setting 10 µs: Digital filter 1.6 to 2 µs Input time constant setting 20 µs: Digital filter 9 to 12 µss Input time constant setting 110 µs: Digital filter 90 to 93 µs Input time constant setting 500 µs: Digital filter 300 to 400 µs Input time constant setting 1 ms: Digital filter 800 to 900 µs Input time constant setting 2.5 ms: Digital filter 2.3 to 2.4 ms Input time constant setting 5 ms: Digital filter 4.0 to 4.5 ms Input time constant setting 10 ms: Digital filter 9 to 9.5 ms
	Response frequency			(High-speed A-phase and B-phase input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V±10%, Duty 50%
Output specifications	Relay number			R500 to R515 (16 points)
	Output mode			Relay
	Rated load			250 VAC/30 VDC, 2 A
	Common method			2 to 4 points/1 common
	ON/OFF response time			10 ms or less
	ON resistance			50m Ω or less
	Minimum applicable load			100 µA/100 mVDC
	Relay life			Electrical: 100000 cycles or more (20 cycles/minute), Mechanical: 20000000 cycles or more
	Relay replacement			Impossible
Built-in serial port	Interface	Communication standard		RS-232C
		Connection		Modular connector
	Transmission specifications RS-232C	Baud rate		1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
		Transmission method		Full duplex
		Data format	Start bit	1 bit
			Data bits	7 bits, 8 bits
			Stop bits	1 bit, 2 bits
		Error detection	Parity	Even, odd, none
		Transmission distance		15 m
		Number of transmission units		1
	Indication			SD (green), RD (red)
Internal current consumption				86 VA (VA is calculated with a power factor of 30%.)

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.

OUR SURPLUS

Item will be ship via economy shipping, delivery take about 2 to 5 working days to most countries or urgent shipment via FEDEX, UPS,OR DHL

+++Please read the Terms & Condition before purchase+++

ACCESSORIES

Any accessories, manuals, cable and etc that are not in the picture listing or mention, it is NOT INCLUDED.

INTERNATIONAL BUYER

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying

WARRANTY

Our warranty is valid for 14 days after initial receipt of item.

PAYMENT TERMS

PAYPAL, WIRE TRANSFER TT or Contact Us

RETURN POLICY

-For item condition not as described, defective. Please report to us for replacement or refund within 14 days of receipt.

-Returns must be in their original condition and include all shipped accessories. Shipping fees will NOT be credited for returns and ALL RETURN SHIPPING COSTS ARE THE RESPONSIBILITY OF BUYER.

- All items will ship with our warranty label. If any stickers have been removed or tampered, your refund will be canceled. ]