Selling a large lot of  high quality router bits.  These would easily cost $600 new today.   My asking price is less than half that at $15 each plus shipping!

This is a great deal to expand your set or get some backups to work into your shop rotation.

What you see is what you get.  Zoom in on photos to get an idea of cutter and shank condition.  Conditions very from like new to a bit worn, dusty, or just in need of a good cleaning.  Most have plenty of life left.

I have tried to list the model numbers and description as best as possible.  These were used in my home workshop.  I retired my router table and switched to a CNC so I don't use bottom and top bearing bits anymore, except some top bearing I saved for handheld repair work.   These aren't generic hardware store quality. These were all bought from woodworking suppliers.  Most are top brands Freud, Whiteside, Amana, UltraShear with a few generics or overseas.   The ages range from about 2 to 12 years old.   

These have all been used but you can see almost all have the original packaging they were cared for.  Many of the straight bottom bearing bits espeically smaller ones were used only for making MDF templates or cutting small corners in trim parts on the router table.   I switched most of my stable of bits out to 1/2" shank for better stability so that’s most of what you are getting.

In order pictured top down left to right

1. Freud 505-59 - 3/4" Top + Bottom Bearing Flush Trim  - 58
2. Freud 34-124 - 3/8" Radius Roundover - 48
3. Freud 34-119 - 3/16" Radius Roundover - 29
4. Freud 50-116 - 3/4" Top Bearing Flush Trim - 29
5. WoodPeckers Ultra-Shear US57510tp - 3/4" double Top Bearing Flush Trim - 34
6. Whiteside 2710 - 3/4"  Top + Bottom Flush Trim - 38
7. Whiteside 1502 - 1/2" Bottom Flush Trim - 33
8. Amana 47120 - 1/2" Bottom Flush Trim - may be undersize .495" - 34
9. Whiteside 2000C - 1/8" Radius Roundover - 27
10. Grizzly 1/4"?  Radius Roundover
11. ??? 3/8" Radius Roundover
12. Whiteside 3014 - 3/4" Pattern Top Bit  -35
13. Whiteside RFTD1600 - 1/8" Flush Trim - 40
14. Whiteside ??? 1/4" Bottom Flush Trim
15. Amana MR0103 3/16" Flush Trim 37
16. Whiteside 45degree bevel cutter  30 
17. Two Unknown 1/2" bottom bearing flush cut with 1/4" shanks

Plus two throw ins

18. Amana 1/2 " to 6mm collet reducer
19. Yonico 1-1/2" Radius Roundover - used for roughing guitar neck back profiles - these wear out quick it probably doesn't have much life left but it sure looks cool