Performance Tool Heavy Duty Remote Starter Push-Button Switch 5-ft Wire Leads
FREE AND FAST Shipping!
We are open to answering all of your questions!
100% Money Back Guarantee if you are not satisfied with your purchase!
Product Description:
Caution!
Exercise care when making this connection because battery voltage is always present at the solenoid or starter relay. Personal injury may be caused if leads are shorted to a ground through tools, wires or wristwatch.
Turn the ignition switch to the On position before using the Remote Starter Switch if you wish to start the engine.
If the vehicle is equipped with an engine Hot indicator, the lamp test circuit which is in the ignition system could be damaged if the remote starter switch is energized with the ignition switch in the Off position.
Key in the off position would be used if you’re just cranking the engine over for special jobs like setting valves, or testing compression.
Typical Connection to Fender Mounted Solenoid (Ford)
This relay may have three or four terminals, two large ones and one or two small ones.
1. Remove the wires connected to the small terminal if only one small terminal is provided. If two small terminals are present, remove the wires from the small terminal marked S.
2. Connect one lead of the Remote Starter Switch to the bare small terminal where the wires were just removed.
3. Connect the other lead of the Remote Starter Switch to the Battery Terminal of the relay.
4. Crank the engine by depressing the Remote Starter Switch.
Typical Connection to Starter Mounted Solenoid (GM)
This relay may have three or four terminals, two large ones and one or two small ones.
1. Connect one lead of the Remote Starter Switch to the small terminal of the solenoid marked S. Be cautious as these connections are exposed and very close together.
2. Connect the other lead of the Remote Starter Switch large battery terminal on the solenoid. This is the heavy cable coming from the battery.
3. Crank the engine by pulling the trigger on the Remote Starter Switch.
- MAINTENANCE USE: Allows one person to start and crank the engine from either side of the vehicle
- 5-FOOT LEADS: Made of heavy-duty oil and grease resistant 12-gauge wire
- PUSH-BUTTON SWITCH: High-current capacity; Provides long life and reliable operation
- SAFE WORKING: A red light glows when starter switch is connected to a hot circuit
- MAIN BODY: 4-ton hydraulic hand pump
Your satisfaction is what we are pursuing!
BUY NOW!
Handling Time: It usually takes 1-2 business days to ship the item once the payment has been received.Payment: Secure Payments through eBay. It is your best protection as a buyer.Return Policy: We offer a 60 Day Return Policy. However, all items purchased must be returned in the same condition as they were received in. Money back guarantee.
We only ship to the confirmed by eBay address.
We do NOT accept P.O. BOXES - please provide a physical address!
The item will be shipped directly from our supplier. In the unlikely event that the item is sold out or on backorder, we will refund 100% of your money.
Thank you for your attention!
