Add the flexibility of RDL's TX-TPR2A line-level receiver to your next install. The two-pair audio receiving module is compatible with RDL Format-A twisted pair products. Audio is input via an RJ45 jack that feeds a pair of terminal block outputs, sending balanced or unbalanced signals to the desired destination. The receiver features bridging inputs, allowing for the connection of up to nine additional Format-A teisted pair receiver outputs when connected via their Loop Out jacks, offering wide flexibility in system design. The TX-TPR2A may be powered directly from a 24 Vdc power supply. Local power connected to the module is also fed to all modules connected to the INPUT RJ45 jack. The TX-TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor, or RDL power inserter connected to the same twisted pair cable. A power supply is not included.
RDL TX-TPR2A Features:
- Two -10 dBV Unbalanced or +4 dBu Balanced Outputs
- Detachable Terminal Block Outputs
- Audio Outputs for Two Pairs (B and C)
- Powered Locally or Remotely through RJ45 Jack
- Local Power Feeds all Modules Connected to RJ45
- Wiring Fault Protection by Automatic Resetting Fuse
- Local Power Input on dc Power Jack
- Blue LED Indicates Module is Powered
- Studio-Quality Precision Active Balanced Circuitry
RDL TX-TPR2A Specifications:
- Input: RDL TP Format-A
- Input Connection: RJ45
- Format-A Signal Pairs Used (2): B, C
- Outputs (4): 150 Ω Balanced (2); 1 kΩ Unbalanced (2)
- Output Connections: Detachable Terminal Block
- Output Level: +4 dBu Bal., +22 dBu Max; -10 dBV Unbal., nominal
- Frequency Response: 10 Hz to 30 kHz (+/- 0.1 dB)
- THD+N:< 0.005%
- Noise (below +4 dBu):< -90 dB
- Crosstalk:< -90 dB (1 kHz);< -75 dB (20 Hz to 20 kHz)
- Headroom: >20 dB (above +4 dBu)
- CMRR: >60 dB (50 Hz to 150 Hz)
- Indicator: Power LED
- Power Connections (2): Power Jack; RJ45
- Power Requirement: 24 Vdc @ 30 mA
- Dimensions: 3.0” (7.6 cm) W; 1.6” (4.08 cm) H; 1.2” (3.05 cm) D
