• Fully complies with UL -864 and NFPA-72.
• Rugged CRCA sheet with powder coated finish.
• Operates on 110 - 220VAC 50 /60 Hz, AC mains power supply.
• 16x2 Dot Matrix LCD display.
• 4/8 Class B Style ?B ? or Style ?C? Initiating Device Circuit (IDC).
• All zones accept smoke detectors and normal open contact devices.
• Any zone can be configured as alarm or supervisory zone.
• 2 Class B Notification Appliance Circuits (NAC).
• NAC shall be programmed as silenceable or non-silenceable.
• Supervisory zone shall be latching or resettable.
• Standby (battery) backup 24VDC power supply with built in charger.
• Error free Fire / Fault status in unambiguous colored LED indication.
• System ON indication.
• Main & Standby status with audible and visual indication.
• Battery low visual warning with audible tone.
• Form C relays for fire, fault and supervisory.
• Resettable / Steady 24VDC Output.
• RS 485 Communication facility (Optional).
• Lamp test facility.
• All field wiring circuits are power limited except 110-220VAC and battery.
• All field wiring circuits are supervised.
• Walk test facility.
• Zone isolation facility with loop voltage cut off.
• Earth fault annunciation facility at 0 ohms.
• AC low voltage cutoff.
• Programmable AC loss delay.
• Programmable alarm verification.
• Programmable trouble reminder.

Special Features

• Switched Mode Power Supply.
• Modular Construction.
• Auto Resettable Fuse.
• Surge Protection for all Input and outputs.
• Battery polarity reversible protection.
• Surface Mount Technology.
• Over all current consumption is low.