Read
well before buying
You are buying
only files for 3D printing, no material objects will be sent.
After the
purchase you will be sent a link, where you can download the files
no refunds are
made
Super Trump Model
Printing Miniature Assembly File STL OBJ for 3D Printing FDM-FFF
DLP-SLA-SLS
Two size 1: 6
for FDM-FFF, 1: 12 for DLP-SLA-SLS,
Assembly Figure
more than 200 hours of modeling
two versions
however, the dimensions can be changed
with each slicer
in total Super
Trump is composed of 2,7 mil points
all the files
have been decimated by the polygons, but without losing the details,
this makes the light files suitable for each computer
dimensions approximately FDM-FFF W
20 Cm D 19 Cm H 28 Cm
W 7,8 inch D 7,4 inch H 11 inch
dimensions approximately DLP-SLA-SLS
W 10 Cm D 9,8 Cm H 14 Cm
W 4 inch D 3,8 inch H 5,5 inch
all files are already in place for
optimal printing
Super Trump3D
model was designed to get a clean print result, without considering
printing material consumption, However, you are free to rotate, or
scale,
every part of the
model in the most convenient way for you.
Each file has
been checked and repaired with Netfabb
The parts of the model are already
positioned for 3D printing
Compatible with every Slicer-
Simplify3D, Care, Slic3r, etc ...
All the parts of the model have been
cut so as to be printed vertically, for a higher quality of printing
Recommended
settings for printing
each part was cut to be printed
vertically, to have a better quality print, so for the upper parts,
it is recommended to print with a 4-5
skirt
Quality
Layer height: 0.1mm*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Horizontal expansion: 0.04mm (when
entering 0.04mm index, the 3D printer perceives the model as
monolith, i.e. as having no hidden layers).
*Layer Height 0.1mm is recommended for
a better quality for the printed model. However, the printing time
will double.
As a STL file provider, our goal is to
ensure that the files are error-free and printable in the most
accurate way. This is why we only test print the most difficult
segments of
the model’s parts.
The model's parts have been tested and
printed in PLA. In case you need advice where to get your filaments
from, check our partner's website.
Speed setups:
Infill speed: 30mm/s
Outer shell speed : 30mm/s
Inner shell speed: 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:
Infill pattern: Grid
Line distance: 1.5mm
Infill overlap: 20%
Infill layers: 0
Support:
Enable support: Check
Placement: Everywhere
Overhang angle: 30°
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: check
Pattern: Grid
Line distance: 1.5mm
LEGAL PRIVACY
POLICY: Any UNAUTHORIZED use of my profile, video, pictures or
audio in any form or in a forum now or in the future is NOT
permissible without my expressed written consent.
Any act to promote or gain profit in
any manner (e.g. either monetarily or socially) from the use of my
profile, video, pictures or audio in any form my profile is a
violation
of my privacy and subject to legal
action. BY WATCHING THIS: You acknowledge and agree that you shall
not post, upload, publish, transmit or make available in any way
content of this
page including images and recording
streamed live video available for download. This is intended as, and
presented as a one time, live, one view presentation only.
Penalties of Copyright Infringement: By
reproducing, republishing or redistributing the work of a copyright
holder without permission, you may be violating or infringing
on his or her rights under the
Copyright Act. The copyright holder may sue for compensation cost
from $ 250 to $ 150,000 or one year jail sentence
