USB and DIN MIDI Controller with 8 Faders, 2m USB cable .

Box dimensions are 170mm x 122 mm x 35mm and the fader travel/throw is 60mm.

When a fader is moved the display shows the output CC value.

The CC number, MIDI Channel,Range and pre-set can be changed using the LED display and small button located on the back of the box no extra software is needed.

There are 5 pre-sets each store 8 fader cc numbers,channel and range so a total of 40 fader presets (8x5)

Setting are stored and remembered when powered off no extra software is needed.

Each Fader can also be set to a different channel allowing control of multiple devices

The controller can use both USB and DIN MIDI at the same time allowing you to control DAW software with a fader and a hardware device with another.

The USB Cable is also needed to power the unit when only using the DIN socket and needs to be plugged into a USB port or plug socket (phone charger plug).

Can be used to control Ableton Live and other DAW software that allows MIDI learn/mapping, and also any device that uses MIDI CCs

(please refer to the manual of your device for the CC numbers).

__________________________________________

Quick video demo (copy and paste the link).

The video is of the 3 fader version the only difference is it does not have the pre-set button

 www.youtube.com/watch?v=QSzSl2oq380

Controlling software (Renoise) and altering range with Arturia Microfreak

(copy and paste the link).

www.youtube.com/channel/UCgWSqQln0fNKMmSzE0zLqbA

 Korg Volca Keys and Midi setup

https://youtu.be/HbXW_5Xn4EQ

_________________________________________


HOW TO SET THE CC NUMBER

To set the CC# for a fader press and hold the button located on the top of the box, then move the fader to the number of the CC you want it to control.  Let go of the button and the display will show 'CC-' then flash the new CC number.

Tip: If you find it difficult to stop on the exact number, for example you are trying to stop on 10 but it only changes between 9 and 11 go to 30+then back down and you should be able to stop on 10.


DISPLAY THE CC NUMBER A FADER IS SET TO AND THE PRESET NUMBER
Press the small button TWO times and keep the button held in on the 2nd press and the display will show “dSp” (display) Now move a fader and the display will show the current set cc number
Then release the button to show the preset number

CHANGE ALL FADER CHANNEL NUMBERS (1-16)
The channel is changed the same way the cc# is changed but you press the small button THREE times and keeping the button held in on the 3rd press and the display will show “CHA” (channel all) now move any knob/fader to the number of the channel you want all the faders to be set to
Then let go of the small button and the display will show “c” and the new channel number

CHANGING THE PRESET  (1-5)
Press the small button FOUR times and keep the button held in on the 4th press and the display will show “PrE” (pre-set) Now move the fader to the pre-set number you want
Then let go of the small button and the display will show “PrE” then the preset number

CHANGE THE LOW RANGE OF A FADER (0-127)
Press the small button FIVE times and keep the button held in on the 5th press and the display will show “LO” (low)
Now move the knob/fader you want to change the low range of and move it to the number you want it set to
Then let go of the small button and the display will show “LO” and flash the low range of that knob/fader

CHANGE THE HIGH RANGE OF A FADER (0 -127)
Press the small button SIX times and keep the button held in on the 6th press and the display will show “HI” (high)
Now move the knob/fader you want to change the high range of and move it to the number you want it set to
Then let go of the small button and the display will show “HI” and flash the high range of that knob/fader

CHANGE ONE FADER CHANNEL (channel numbers 1-16)
changing just one fader channel is done the same way as all the channels but you press the small button seven times and keep the button held in on the 7th time  and the display will show “CHI” (channel Independent) now move the fader to the number of the channel you want the fader to be set to
Then let go of the small button and the display will show “c” and the new channel