|
|
|
|
|
|
|
|
Install the window regulator as follows:
Part1 Disconnecting the Window from the Motor
1.Remove the interior door panel.
2.Gently remove the plastic door cover.
3.Locate the window mounting bolts.
4.Move the window if necessary to access the bolts.
5.Remove the bolts while a friend supports the window.
6.Raise the window up into the door frame.
7.Use masking tape to secure the window in place.
Part2 Disconnecting the Motor and Regulator
8.Remove the window regulator bolts.
9.Locate and remove the window motor mounting bolts.
10.Disconnect the motor wiring harness connector.
11.Remove the motor and regulator through the access port.
12. Connect the regulator to the new motor.
Part3 Installing a New Power Window Motor
13.Slide the new motor and regulator back into place.
14.Replace the mounting bolts.
15.Reconnect the electrical connector.
16.Remove the masking tape and lower the window back down.
17.Insert the window mounting bolts.
18.Reinstall the plastic liner and interior panel.
You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)
Window Motor For Jeep Patriot 2007-2017 Front Driver LH Side
Install the window regulator as follows:
Part1 Disconnecting the Window from the Motor
1.Remove the interior door panel. 2.Gently remove the plastic door cover. 3.Locate the window mounting bolts. 4.Move the window if necessary to access the bolts. 5.Remove the bolts while a friend supports the window. 6.Raise the window up into the door frame. 7.Use masking tape to secure the window in place.
Part2 Disconnecting the Motor and Regulator
8.Remove the window regulator bolts. 9.Locate and remove the window motor mounting bolts. 10.Disconnect the motor wiring harness connector. 11.Remove the motor and regulator through the access port. 12. Connect the regulator to the new motor.
Part3 Installing a New Power Window Motor
13.Slide the new motor and regulator back into place. 14.Replace the mounting bolts. 15.Reconnect the electrical connector. 16.Remove the masking tape and lower the window back down. 17.Insert the window mounting bolts. 18.Reinstall the plastic liner and interior panel. Payment
1.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
3.Payment must be received within 10 days as auction ended or order might be delayed.
Shipping
1. Orders processed within 24 hours of payment verification.
2. The images shown are not the actual item and are for your reference only.
3. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
Returns
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging
Contact us
You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays) Copyright of HK-batteries. All rights reserved. |
