- 【Application】Stair cable railing kit works for 1/8" wire rope in multi-angled stairways as well as horizontal sections. The multi-angle feature and adjustable closed-body enables the turnbuckle to rotate from 0-180 degrees and adjust the length freely. The swage toggle turnbuckle hardware can be used at angle stair railing or horizontal cable guardrail. Suitable for outdoor or indoor.
- 【T316 Stainless Steel】cable railing hardware is made with T316 stainless steel so you don’t have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Cable railing Tensioner kit can be used with wood posts.
- 【Size】Turnbuckle = 7 9/32"(Min) - 10"(Max) , Deck Toggle End = 3", T316 stainless steel screws = 1 7/8". Suitable for 1/8″ stainless steel wire rope cable. If using the toggle turnbuckle, lengthen the turnbuckle to allow cable tightening once installed.
- 【Easy To Install】These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic crimper tool & cable cutter: B083Z5JQJ9. It comes with spanner and screwdriver, the spanner multi tool feature tightening jaws specifically for lag screws, swage studs and turnbuckles. Insert one mini screwdriver into the center hole of the turnbuckle to tighten the cable. Please watch our installation video or installation guidance.
- 【Package List】10 Pair T316 stainless steel swage toggle turnbuckles & swage toggle ends, stainless screws, 1 x spanner multi tool & screwdriver. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us. We are committed to all after-sales, so that buyers can better obtain satisfactory service.
10 Pairs 1/8" Cable Railing Hardware Kit Swage Toggle Turnbuckle for Wood Post T316 Stainless Steel Deck Cable Railing System Angle 180° Adjustable Stairs 20 Pack
Package List: 10 pairs of T316 stainless steel swage toggle turnbuckles & swage toggle ends, stainless screws, 1 x spanner multi-tool & screwdriver. This item comes with instructions for easy installation, and we also provide video references for your convenience.
Material: Our cable railing kits are made of premium T316 stainless steel, which is corrosion and rust resistant, so you don’t have to worry about them rusting over time. Because of their material, you can install them both indoors and outdoors. The cable railing tensioner kit can be used with wood posts.
Size: Turnbuckle = 7 9/32"(Min) - 10"(Max) , Deck Toggle End = 3", T316 stainless steel screws = 1 7/8". Suitable for 1/8″ stainless steel wire rope cable.
The 1/8" Cable Railing Kit is designed with an adjustable angle. The multi-angle feature and adjustable closed body enable the turnbuckle to rotate from 0 to 180 degrees and adjust the length freely. The swage toggle turnbuckle hardware can be used at an angled stair railing or horizontal cable guardrail. Suitable for outdoor or indoor use.
What is the maximum length it can adjust to?
The 10 Pairs Cable Railing Hardware Kit adjusts from a minimum of 7 9/32 inches to a maximum of 10 inches per turnbuckle. The turnbuckles rotate 0-180 degrees for multi-angle installations.
For longer cable runs:
With 2 turnbuckles per cable run, you can span up to 10 feet maximum between end posts
Post spacing should not exceed 4 feet
Cable spacing should not exceed 4 inches
Customers appreciate the wide adjustment range, especially for beginners who can't cut cable to precise lengths. The adjustable design makes it forgiving during installation.
How do I install this kit? These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic crimper tool & cable cutter: B083Z5JQJ9. It comes with a spanner and screwdriver; the spanner multi-tool features tightening jaws specifically for lag screws, swage studs and turnbuckles. First, use the crimping tool to crimp the cable railing kits and wire rope, then install the toggle end into one post and the toggle turnbuckle into the other post. Before cutting the cable to your railing length, unscrew the turnbuckle, then use the crimping tool to crimp twice. Finally, insert a mini screwdriver into the center hole of the turnbuckle to tighten the cable.
Complete stair compatibility: Works for both horizontal sections and angled stairways
Customer Experience on Stairs:Reviewers specifically mention "great for stairways because of the ability to pivot the angles" and that they "look so amazing" on stairs.
Installation Advantage:The wide adjustment range is particularly helpful on stairs where precise measurements can be challenging. Customers consistently report easy installation, with the adjustable design compensating for measurement variations common in stair projects.
The T316 stainless steel construction ensures durability for high-traffic stair areas, and the multi-angle feature eliminates the need for special angled hardware.
**Sending direct message to cancel the order is not allowed for every case.*