Aceparts5
|
|
|
|
|
|
|
|
|
|
|
Description:
The bleeder screws provide trouble-free bleeding and a positive seal
The Banjo bolts and copper washers are included for a perfect seal (where applicable)
Rear parking brake hardware is installed and lubricated where applicable
100% pressure tested to guarantee proper function under all driving conditions
Pre-lubricated guide bolts on mounting brackets save installation time and prevent seizing
Electrostatic Powder Paint Resists Corrosion
Premium Silicone Lubrication For Smooth Operation
Package Include:
1x Rear Left Brake Caliper
Vehicle Information Fitment:
for 1990-1993 Mazda Miata All Submodel L4 1.6L
for 1994-1997 Mazda Miata All Submodel L4 1.8L
for 1999-2000 Mazda Miata All Submodel L4 1.8L
for 2001-2004 Mazda Miata All Submodel L4 1.8L (w/o Sport Suspension)
for 2005 Mazda Miata Base L4 1.8L (w/o Sport Suspension)
for 2005 Mazda Miata LS L4 1.8L (w/o Sport Suspension)
Note: for Mazda Miata 2005 only fit Base & LS Submodels
Note:
To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the notes section in the compatibility chart for additional specifications about this part.
When to Replace Brake Calipers?
Over time in normal driving conditions, the heat generated from the braking system can weaken and break down seals inside the calipers.They can become rusty, contaminated or dirty, and start to leak brake fluid if you don’t drive regularly.
However, you should have your brakes checked immediately if you experience any of the following:
1. The brakes are continuously squeaking, squealing or grinding
2. The brake or antilock braking system (ABS) warning light comes on
3. The car jerks or pulls to one side when braking
4. You need to pump The brakes for them to work properly
5. The brake pedal feels unusually soft and spongy or hard
6. You notice brake fluid leaks around the wheels or engine compartm
How to Install Brake Calipers？
Step1 - Remove an Old Brake Caliper:
1. Raise your vehicle with a jack and remove the wheel in front of the caliper.
2. Remove the caliper bolts and pry the caliper off with a screwdriver.
3. Pull the brake pads from the caliper bracket, then remove the bracket.
4. Disconnect the caliper from the brake hose by turning the banjo bolt.
5. Secure the new caliper to the brake hose and screw the bracket into place.
6. Slide the brake pads back onto the caliper bracket.
7. Attach and secure the new caliper to the bracket with the bolts and a ratchet.
Step2- Install New Brake Caliper:
1. Get a new brake caliper that’s compatible with your vehicle
2. Unscrew the banjo bolt on the caliper that connects to the brake hose
3. Secure the hose onto the intake port on the new caliper.
4. Screw the caliper bracket against the brake rotor
5. Slide the brake pads onto the front and back of the caliper bracket
6. Attach the new caliper to the bracket so it fits around the brake pads
Step3 - Bleeding the Brake System:
1. Loosen the cap on the main brake cylinder under your vehicle’s hood
2. Connect a clear plastic hose between the bleeder valve and a bottle
3. Open the bleeder valve on the caliper until it starts leaking brake fluid
4. Ask a helper to pump the brake pedal until you don’t see bubbles in the hose
5. Reattach the wheel to your vehicle
6. Take your vehicle for a test drive to make sure the brakes work properly
| Item Specifics | |
|---|---|
| Brand | Aceparts |
| Manufacturer Part Number | A182266TS01 |
| Interchange Part Number | 19-1378 brake Piston |
| Surface Finish | Chrome Plated |
| Color | Silver |
| Fitment Type | Direct Replacement |
| Mounting Hardware Included | No |
| Placement on Vehicle | Rear;Driver |
| Manufacturer Warranty | 1 Year |
| Custom Bundle | No |
| Caliper Casting Material | Metal |
| Items Included | 1X Brake Caliper |
| Piston Material | metal |
| Piston Outside Diameter (mm) | 31.7 |
| Piston Size(In.) | 1.25 |
| Bracket Included | NO |
| Piston Quantity | 1 |
| Bleeder Thread Size | M7X1 |
| Inlet Port Thread Size | M10X1 |
| Dust Boots Included | NO |
| Bracket Mounting Bolts Included | NO |
| Type | Brake Calipers |
| Superseded Part Number | Brake caliper piston,caliper covers |
| Copper Washers Included | Yes |
We can accept Credit card, Debit card, Apple Pay, Google Pay,visa,or master card,and so on.Thank you.
Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).
· 20% restocking fee will be applied if returned item is not in brand new condition.
①no information what is wrong with item
③ wrong position/color choosen
⑤ don't like
· Items that have been installed or altered are non-returnable but it must be reported to us immediately.
· If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.
· If you are satisfied with the product you received, wish you can leave us a feedback
Any question, please contact us.
Aceparts5
Shop Category Hot Item
Picture
New List Item
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
1pc Rear Left Brake Caliper w/ Bracket for 1990-2004 Mazda Miata 2005 Base LS
Description:
Package Include:
Vehicle Information Fitment: for 1990-1993 Mazda Miata All Submodel L4 1.6L for 1994-1997 Mazda Miata All Submodel L4 1.8L for 1999-2000 Mazda Miata All Submodel L4 1.8L for 2001-2004 Mazda Miata All Submodel L4 1.8L (w/o Sport Suspension) for 2005 Mazda Miata Base L4 1.8L (w/o Sport Suspension) for 2005 Mazda Miata LS L4 1.8L (w/o Sport Suspension) Note: for Mazda Miata 2005 only fit Base & LS Submodels
Note:
When to Replace Brake Calipers? Over time in normal driving conditions, the heat generated from the braking system can weaken and break down seals inside the calipers.They can become rusty, contaminated or dirty, and start to leak brake fluid if you don’t drive regularly.
However, you should have your brakes checked immediately if you experience any of the following:
How to Install Brake Calipers？ Step1 - Remove an Old Brake Caliper:
Step2- Install New Brake Caliper:
We can accept Credit card, Debit card, Apple Pay, Google Pay,visa,or master card,and so on.Thank you. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
· 20% restocking fee will be applied if returned item is not in brand new condition. ①no information what is wrong with item ③ wrong position/color choosen ⑤ don't like · Items that have been installed or altered are non-returnable but it must be reported to us immediately. · If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers. · If you are satisfied with the product you received, wish you can leave us a feedback Any question, please contact us. All rights reserved. |
