25pc 12mm Diffused RGB LED Pixels 5V WS2801 Drivers Waterproof Addressable Color

nooelec

$18

CONTACT SELLER SEE ON EBAY

nooelec

$18

DESCRIPTION

Welcome to NooElec @ eBay!

Product Details
Quantity	25pc 12mm WS2801-Driven LED Pixels

Technical Details
WS2801 Datasheet
Applications	LED lighting, displays

Product Information
Beautiful, full-color LED pixel strings with pre-soldered JST style connectors. Not only are these fully waterproofed, but each LED is also independently addressable, opening up entirely new lighting possibilities. Each LED is powered by an WS2801 IC. Each end of the pixel string has a JST-style connector. Data in and clock in can be found on the female connector; data out and clock out on the male connector. Pinout is as follows: Red=5V DC Green=Clock Yellow=Data Blue=Ground For you Arduino users we highly recommend the open-source fastspi library as jumping point for your own code. The WS2801 employs a 2-wire serial data connection, similar to SPI or I2C. ICs are chained together which means whole strings can be controlled using just 2 pins on your microcontroller. Data is clocked in starting with the MSB of the red gray scale data and ending with the LSB of the blue gray scale data. See picture below for details. There is plenty more information available in the datasheet linked to above. (Click to enlarge)

Product Information

Beautiful, full-color LED pixel strings with pre-soldered JST style connectors. Not only are these fully waterproofed, but each LED is also independently addressable, opening up entirely new lighting possibilities. Each LED is powered by an WS2801 IC.

Each end of the pixel string has a JST-style connector. Data in and clock in can be found on the female connector; data out and clock out on the male connector. Pinout is as follows:

Red=5V DC
Green=Clock
Yellow=Data
Blue=Ground

For you Arduino users we highly recommend the open-source fastspi library as jumping point for your own code.

The WS2801 employs a 2-wire serial data connection, similar to SPI or I2C. ICs are chained together which means whole strings can be controlled using just 2 pins on your microcontroller.

Data is clocked in starting with the MSB of the red gray scale data and ending with the LSB of the blue gray scale data. See picture below for details. There is plenty more information available in the datasheet linked to above.

(Click to enlarge)

50pc 12mm Diffused RGB LED Pixels 5V WS2801 Drivers Waterproof Addressable Color

50pcs 10mm RGB Multicolor Diffused LED Diode Lights Common Cathode Frosted

RGB Slow Flash Fade Color Changing Change LED 3mm Diffused Lens US Stock Qty 50

10pcs 5MM LED Common Cathode Frosted Diffused RGB Red Green Blue

3MM 4-Pin Common Anode RGB LED Diffused Nipple Pkg Keyboard Arduino 5 10 25 100

12V Diffused LED with HOLDER Pre-Wired Cable 3mm Blurred Diode Various Colours

WS2812B RGB LED Ring Addressable LED Digital 5V 5050 Circle. 37 93 241 Pixels

WS2812B RGB LED Digital Flexible Individually Addressable Panel Light 1~5Pcs