|
|
|
|
|
|
|
|
|
|
|
|
|
|
2Pcs Upstream + Downstream O2 Oxygen Sensor For Chrysler Mitsubishi Eclipse
| Make | Model | Engine | Year | Notes |
|---|---|---|---|---|
| CHRYSLER | SEBRING | V6-3.0 | 2005-2004 | 1 Upstream Right & 1 Downstream Right |
| CHRYSLER | SEBRING | V6-3.0 | 2003-2001 | 1 Upstream Left & 1 Downstream Left |
| DODGE | STRATUS | V6-3.0 | 2005-2004 | 1 Upstream Right & 1 Downstream Right |
| DODGE | STRATUS | V6-3.0 | 2003-2001 | 1 Upstream Left & 1 Downstream Left |
| MITSUBISHI | DIAMANTE | V6-3.5 | 2004-2001 | 1 Upstream Left & 1 Downstream Left |
| MITSUBISHI | DIAMANTE | V6-3.5 | 2000-1999 | Calif. 1 Upstream Left & 1 Downstream Left |
| MITSUBISHI | ECLIPSE | V6-3.0 | 2005-2004 | 1 Upstream Front & 1 Downstream Front |
| MITSUBISHI | ECLIPSE | V6-3.0 | 2003-2002 | 1 Upstream Rear & 1 Downstream Rear |
| MITSUBISHI | ECLIPSE | V6-3.0 | 2001 | 1 Upstream Front & 1 Downstream Front |
| MITSUBISHI | ECLIPSE | V6-3.8 | 2012-2006 | 1 Upstream Rear & 1 Downstream Rear |
| MITSUBISHI | GALANT | V6-3.0 | 2003-2001 | 1 Upstream Left & 1 Downstream Left |
| MITSUBISHI | GALANT | V6-3.8 | 2009 | 1 Upstream Rear & 1 Downstream Rear |
| MITSUBISHI | GALANT | V6-3.8 | 2008 | 1 Upstream Rear & 1 Downstream Rear |
| MITSUBISHI | GALANT | V6-3.8 | 2007-2004 | 1 Upstream Rear & 1 Downstream Rear |
| MITSUBISHI | MONTERO | V6-3.5 | 2000-1998 | Calif. 1 Upstream Right & 1 Downstream Right |
| MITSUBISHI | OUTLANDER | V6-3.0 | 2013-2011 | 1 Upstream Left & 1 Downstream Left |
Q: Why does the oxygen sensor have false alarm, after installation ?
A: The clearing of the errors can be obtained on most systems when the vehicle battery is disconnected for at least 60 seconds. The assignment of the new sensor parameters is done automatically when the errors are cleared, but in some systems a short adapting tour is required. In this case the vehicle has to be driven on the road for some 10-15 minutes, in order to have the ECU adapt itself to the new sensor.
Q: How do I know the O2 sensor is good or not ?
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Q：How should I install oxygen sensor ?
A: The following is the installation instructions: Use the correct part number as listed in the application catalogue ,Do not use sensor if i has been dropped ,Remove protection cap just prior to installation;
Firstly install sensor body ensuring lead wire is not twisted or bent , Do not use impact wrench or socket type wrench to install sensor ,M18 sensors - install finger tight then 1/2-3/4 turn with a wrench (35-45Nm) ;
Then connect and route lead wire as originally installed , Do not allow lead wire to touch exhaust manifold or any other hot component ,Do not apply any substances (especially oil or grease) to connector sensor ,Do not use leaded fuels,silicone or metal based additives.
| Item Specifics | |
|---|---|
| Country of Origin | United States |
| Brand | TINVHY |
| Manufacturer Part Number | TT596275 |
| Warranty | 1 Year |
| Fitment Type | Direct Replacement |
| Position | 1 Upstream Right & 1 Downstream Right |
| Wire Quantity | 4 |
| Sensor Type | Heated |
| Connector Gender | 2* Male |
| Wire Harness Length | 22.83 29.53 |
| Thread Diameter | 0.708 & 0.708 |
| Interchange Part Number | B2OS270 |
We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address supplied by buyer. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy.
Items are generally shipped out with 3 business day after your payment has been cleared (Sat. & Sun. & Public holiday excluded.)
The delivery time usually takes 4~6 business days.
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
We are committed to providing high-quality Auto parts. If you have any problems, please contact us and we will try our best to help you solve them. Hope you have a good shopping here!
2Pcs Upstream + Downstream O2 Oxygen Sensor For Chrysler Mitsubishi Eclipse
We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address supplied by buyer. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Please contact us first when return, exchange and refund is required.Any direct return of purchased items will not be processed.Change-of-mind return can only be accepted within 7 days after purchase.All other returns can be accepted in 30 days.We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
We are committed to providing high-quality Auto parts. If you have any problems, please contact us and we will try our best to help you solve them. Hope you have a good shopping here! All rights reserved. |
Shop Category Hot Item
New List Item
|
On Apr 4, 2026 at 00:50:04 PDT, seller added the following information:
