- Extensively Tested During Manufacture to Guarantee Quality and Reliability
- Supplied With a Factory-Fitted Connector for Easy Installation
- Precision manufactured with a sensing element incorporating premier technical ceramics
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fit Vehicles:
2005-2007 Buick Allure 3.8L
2005-2007 Buick LaCrosse 3.8L
2004-2005 Buick LeSabre 3.8L
2006-2008 Buick Lucerne 3.8L
2004-2005 Buick Park Avenue 3.8L
2004 Buick Regal 3.8L
2004-2005 Chevrolet Impala 3.8L
2004-2005 Chevrolet Monte Carlo 3.8L
2004-2005 Pontiac Bonneville 3.8L
2004-2007 Pontiac Grand Prix 3.8L
Features:
- Extensively Tested During Manufacture to Guarantee Quality and Reliability
-
Supplied With a Factory-Fitted Connector for Easy Installation
-
Precision manufactured with a sensing element incorporating premier technical ceramics
Diagnostic Trouble Codes (DTC)
When oxygen sensor failure occurs, a DTC is recorded in the Engine Control Unit (ECU) and a Malfunction Indicator Lamp (MIL) is illuminated on the dash, alerting the driver the vehicle has a problem.
How to replace an oxygen sensor?
1- Disconnect the battery.
2- Locate the sensor connector by following its wires. Disconnect it.?
3- Remove the sensor cable from its clips all along its way to the sensor.
4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily.
5- Remove the sensor and fit the new one.
6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector.
7- Reconnect the battery and wait 5 minutes before starting the engine.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensor fails to work, in this case.
| Item Specifics | |
|---|---|
| Type | Oxygen Sensor |
| Manufacturer Part Number | WA827WY061YS |
| Brand | autoparts-depot |
| Number of Pieces | 2 |
| Fitment Type | Direct Replacement |
| Interchange Part Number | SG326, 12568234,, O2 Oxygen Sensor |
| Superseded Part Number | 234-4646, 234-4647, |
| Other Part Number | 234-4819, 234-4407, |
| Manufacturer Warranty | 1 Year |
| Custom Bundle | Yes |
| Modified Item | No |
| Position | Upstream, Downstream |
| Universal Or Specific Fit | Specific |
| Attachment Method | Screw-On |
| Thread Size | M18 |
| Terminal Type | Blade |
| Sensor Type | Heated |
| Heated | Yes |
| Hex size | 7/8 in |
| Number of Wires | 4, 4 |
| Wires | 4, 4 |
| Housing Material | Metal |
| Automotive Color / Finish | Steel |
| Technology | Narrow-band |
| Placement on Vehicle | Before After Catalytic Converter |
| Location | Front, Rear |
| Output Signal Range (V) | 0.2 To 0.8 Volt |
| Length | 0 In. |
| Bundle Description | Include 2 Piece Oxygen Sensor |
| Type | Sensor |
| Features | Direct Fit |
1.We accept multiple payment methods
2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
3.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
2. The images shown are not the actual item and are for your reference only.
3. Fast shipping:All our packages use USPS First Class Package Service
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1.We stand behind every product we sell.
All of our brand new items come with a 30-Day money-back or exchange guarantee.
2.Please contact us by eBay email first before you return the item.
1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
2. It is impossible to address issues if we do not know about them!
1. 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. we do not repair or replace items with an expired warranty.
You agree to all of the above-listed policies upon bidding on and winning this auction!

Shop Category Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
2pcs for Chevy Monte Carlo 3.8L Upstream Downstream O2 Oxygen Sensor 2004-2005
Fit Vehicles:
2005-2007 Buick Allure 3.8L
Features:
Diagnostic Trouble Codes (DTC)
How to replace an oxygen sensor?
1- Disconnect the battery. 2- Locate the sensor connector by following its wires. Disconnect it.? 3- Remove the sensor cable from its clips all along its way to the sensor. 4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily. 5- Remove the sensor and fit the new one. 6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector. 7- Reconnect the battery and wait 5 minutes before starting the engine.
Please take a video clip of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
Payment
1.We accept multiple payment methods Shipping
1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) Returns
1.We stand behind every product we sell. 2.Please contact us by eBay email first before you return the item. Feedback
1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Warranty
1. 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty. autoparts-depot_All rights reserved. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
