DESCRIPTION
2x 31in Black Stripes Style Car Racing Truck Hood Car side Stripe Decal Sticker
Our stickers are made of vinyl material, which has heat resistance and thermal elongation. Bubbles and wrinkles during transportation will not affect installation and use!
The following is our recommended installation method:
1、 Please clean the car window glass with clean water and use a towel to wipe and clean the glass.
2、 Tear off the back adhesive film of the sticker and spray the back of the sticker and the car window glass with clean water.
3、 Align the sticker with the car window glass and confirm its position. Use a plastic scraper to slowly remove any bubbles and water inside the sticker.
4、 Tear off the protective film on the surface of the sticker, use a hot air blower or hair dryer to heat the sticker to fully adhere, and continue to use a plastic scraper to remove any remaining bubbles.
5、 Please do not wash the car within 3 days.
1、 Please clean the car window glass with clean water and use a towel to wipe and clean the glass.
2、 Tear off the back adhesive film of the sticker and spray the back of the sticker and the car window glass with clean water.
3、 Align the sticker with the car window glass and confirm its position. Use a plastic scraper to slowly remove any bubbles and water inside the sticker.
4、 Tear off the protective film on the surface of the sticker, use a hot air blower or hair dryer to heat the sticker to fully adhere, and continue to use a plastic scraper to remove any remaining bubbles.
5、 Please do not wash the car within 3 days.
Buyer satisfaction is our service tenet! If you have any questions or concerns about our products and services, please feel free to contact us. We are happy to serve you.
Attention: It is normal to find wrinkles or bubbles on the stickers upon receipt, and it will not affect installation and use. Because our stickers are made of vinyl material, they become soft when heated. Heating them during installation will remove wrinkles and achieve the best installation effect.
Installation steps:
1. Clean the car body and remove any oil, water, or dust from the surface.
2. After determining the installation position, fix the sticker on the car with tape to prevent any movement during installation.
3. Use a hot air gun or hair dryer to heat the sticker and make it soft.
4. Peel off the protective film of the adhesive while using a plastic scraper or bank card to scrape the sticker flat, eliminating bubbles and wrinkles.
