|
|
|
|
|
|
|
|
|
|
|
|
Application:
1995-2004 Toyota Tacoma Rear Wheel Drive Front & Rear (excluding PreRunner Models)
Specifics and Benefits:
About this itemEnsure precise fit and easy installation.100% brand new, tested to meet or exceed OEM specifications.Premium ISO/TS 16949 Quality - Guarantee the highest quality.All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reactionFull Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and rideFluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability
Package Includes:
4x Front Rear Left Right Quick Complete Shocks Struts
How to Replace Shocks and Struts
Replacing shocks and struts can be dangerous if you don't know what you're doing. Read through these instructions carefully before attempting to dismantle your vehicle to ensure safety and efficiency throughout the project.
Spring Compressor
The shocks and struts on many vehicles are integrated with springs that can pop off and injure you or damage your vehicle if not removed properly. In such cases, you'll need a spring compressor in order to take everything apart safely.
You can rent a spring compressor from your local auto parts store but it's important to understand how to use it. This is the most integral function for replacing shocks and struts and you need to be careful. If you have any doubts about removing the springs, you should consider taking your vehicle to a mechanic instead.
Raise the Vehicle
Once you have all of your parts and tools ready, you should raise your vehicle one side at a time using a car jack. After it's up, place a jackstand behind the front wheel to ensure stability. Otherwise, you can use a lift.
Just make sure the vehicle is secure before attempting to loosen anything or getting under the vehicle.
Remove Old Shocks and Struts
First, you'll need to remove the wheels. Next, using your spring compressor, you'll look for three bolts at the bottom of the shock or strut that holds it in place. Loosen these bolts but don't remove them completely just yet.
On the top of shock or strut is another bolt inside the engine compartment. You can use an impact wrench with a socket extension to loosen it. Get this loose and finish removing the other bolts and your shock or strut should come free.
Installing New Shocks and Struts
Once the old shocks and struts have been removed, you can simply replace the new ones. Make sure that you tighten all of the bolts securely. You will probably need a torque wrench to do this.
Put the wheels back on the vehicle and you're ready to test it out.
| Item Specifics | |
|---|---|
| Brand | Sinwonparts |
| Manufacturer Part Number | SIN816566 |
| Type | Shock & Strut Set |
| Fitment Type | Direct Replacement |
| Placement on Vehicle | Front Rear Right Left |
| Manufacturer Warranty | 1 Year |
| Gas Charged Shock | Yes |
| Adjustable | No |
| Quantity | 4PCS (2 Pairs) |
| Features | Gas Charged Shock |
| Items Included | Bolts |
| Adjustable | No |
| Material | Steel |
| Item Length | 14.500"(Front),18.250"(Rear) |
| Interchange Part Number | 343209 ,344055 |
| Other Part Number | 32292 ,37098 |
| Gross Weight (LB) | 16.226 |
| Fitment | For 1995-2004 97 98 99 Toyota Tacoma |
| Shock Absorber Type | Gas |
Shop Category Hot Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us New List Item
|
2x Front Rear For 1995-2004 97 98 99 Toyota Tacoma Only 2WD Shocks Struts
Application:
1995-2004 Toyota Tacoma Rear Wheel Drive Front & Rear (excluding PreRunner Models)
Specifics and Benefits:
About this itemEnsure precise fit and easy installation.100% brand new, tested to meet or exceed OEM specifications.Premium ISO/TS 16949 Quality - Guarantee the highest quality.All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reactionFull Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and rideFluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability
Package Includes:
4x Front Rear Left Right Quick Complete Shocks Struts
How to Replace Shocks and Struts
Replacing shocks and struts can be dangerous if you don't know what you're doing. Read through these instructions carefully before attempting to dismantle your vehicle to ensure safety and efficiency throughout the project.
Spring Compressor The shocks and struts on many vehicles are integrated with springs that can pop off and injure you or damage your vehicle if not removed properly. In such cases, you'll need a spring compressor in order to take everything apart safely.
You can rent a spring compressor from your local auto parts store but it's important to understand how to use it. This is the most integral function for replacing shocks and struts and you need to be careful. If you have any doubts about removing the springs, you should consider taking your vehicle to a mechanic instead.
Raise the Vehicle Once you have all of your parts and tools ready, you should raise your vehicle one side at a time using a car jack. After it's up, place a jackstand behind the front wheel to ensure stability. Otherwise, you can use a lift.
Just make sure the vehicle is secure before attempting to loosen anything or getting under the vehicle.
Remove Old Shocks and Struts First, you'll need to remove the wheels. Next, using your spring compressor, you'll look for three bolts at the bottom of the shock or strut that holds it in place. Loosen these bolts but don't remove them completely just yet.
On the top of shock or strut is another bolt inside the engine compartment. You can use an impact wrench with a socket extension to loosen it. Get this loose and finish removing the other bolts and your shock or strut should come free.
Installing New Shocks and Struts Once the old shocks and struts have been removed, you can simply replace the new ones. Make sure that you tighten all of the bolts securely. You will probably need a torque wrench to do this.
Put the wheels back on the vehicle and you're ready to test it out.
☆ We will only ship to the confirmed shipping address given with the payment.
☆ Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
☆ All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.
☆ We ship the package to your shipping address in eBay. Please tell us your shipping address if it is different from the one in eBay.
☆ The tracking number will be given for the customer to check the shipping status online (registered or faster service only).
☆ We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.
☆ We stand behind every product we sell.
☆ All of our brand new items come with a 30-Days money-back guarantee.
☆ We define the item as defective only if it doesn't function as described.
☆ It is the buyer's responsibility to understand the item description before bidding.
☆ All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
☆ Man-made damage by abuse or wrong operation is not covered by this warranty.
☆ No product liability insurance is assumed.
☆ We are always been trying to provide best service and reliable products for every customer.
☆ If you are satisfed with the product you recieved, please have a good share.
☆ If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback. Please feel free to contact with us, we will try our best to reslove any problem for you.
SINWONPARTS All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
