|
|
|
|
|
|
|
|
|
|
|
Fitment：
2003-2008 Infiniti Fx35 /Fx45
Package Included:2 Pcs Rear Shocks Struts Assembly (Left Right)
Premium Performance & Smooth Ride
- Direct bolt-on replacement, perfect OEM fitment for easy installation
- 100% Brand New & Strictly tested to meet or exceed OEM quality standards
- Thickened steel structure with double chrome polished surface for rust corrosion resistance
- Multi-stage internal valve design adapts to different speeds for smoother driving
- Reduces vehicle bouncing, shaking and abnormal noise
- Long service life with reliable durability for daily commute and highway driving
Why Choose Our Shock?
- Restore your original factory ride comfort
- Improve vehicle stability & reduce body roll
- No modification needed, direct replacement
Note:
- Look Above this product description (Item Specifics) for all part numbers, part brands, placement on vehicle and Compatibility.Make sure that is the correct fitment for your vehicle.
- Bare shocks & struts set only, springs and mounts are not included.
- We'll ship the struts separately in two packages if the full set is over weight. Notice please!
- Please confirm your vehicle year / engine / trim before purchase. If you are not sure about fitment, message us first.
?
HOW TO INSTALL :
*Professional installation is highly recommended.
*Wheel alignment is required after installation.
Step 1: Before you lift the vehicle, loosen lug nuts one full turn.
Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.
Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help
keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt.
Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.
Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need
replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc).
Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)!
Opening brake lines will require bleeding of the brake system.
Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in
expensive and time consuming repairs.
Step 7: Remove sway bar attached to the strut assembly or control arm.
Step 8: Remove the tie rod (only if it attached to the body of the strut, if not leave it attached to the steering knuckle).
Step 9: Remove the strut to knuckle bolts at the bottom of the strut. On some vehicles, the brake caliper and rotor
may need to be removed to gain access.
Step 10: Remove the upper mounting plate bolts located in the engine or trunk compartment. Do not remove the
center retaining nut! It is not safe to unload the spring from the assembly in this position.
Step 11: Carefully remove the old strut assembly from the vehicle. Be very cautious not to let the strut "drop" down
on your brake line, rotor or drum.
Step 12: Install the new Complete Strut Assembly in the reverse order as above (steps 11-6). Using an anti-seize
compound on all fasteners is suggested.
Step 13: Carefully double check your work and make sure everything is tightened to manufacturer's torque specifications.
Step 14: Replace the tire the rotor and tighten to manufacturer's torque specifications.
Step 15: Slowly lower the vehicle down after removing the jack stands. Pay very close attention to any odd sounds
when the vehicle is lowered onto the new Complete Strut Assemblies.
Step 16: It is very important that you immediately "road test" your vehicle right away to ensure that installation was done properly.
Listen and feel for common signs of incorrect installation while driving slowly over speed bumps, rough road or potholes.
| Item Specifics | |
|---|---|
| Brand | x-engineclub |
| Manufacturer Part Number | XE8085864701S |
| Type | Strut |
| Fitment Type | Direct Replacement |
| Placement on Vehicle | Left Right Rear |
| Manufacturer Warranty | 1 Year |
| Features | Sealed |
| Modified Item | No |
| Adjustable | No |
| Gas Charged Shock | Yes |
| Interchange Part Number | CB349027 |
| Other Part Number | CB37312 |
| Kit or Single Part | Kit |
| Kit Parts Included | Set of two rear struts |
| Surface Finish | Powder Coat |
| OE Spec or Performance/Custom | OE Spec |
| Color | Gloss Black |
| Return Policy | Free return or replacement within 30 days |
| Shock Absorber System | Double Pipe |
| Shock Absorber Type | Gas |
| Vintage Part | No |
| Material | Steel |
| Mounting Style | Screw-On |
| Performance Part | No |
| Quantity | 2Pcs |
| Superseded Part Number | Shock and Strut |
| Universal Fitment | No |
| Compressed Length | 13.580"(R) |
| Travel Length | 2.570"(R) |
| Included Hardware | Mounting Hardware |
| Item Length | 16.150"(R) |
| Package Dimension (in.) | 21.26*6.3*3.54 |
| Gross Weight (LB) | 11.905 |
| Package Dimension (in.) | 21.26*6.3*3.54 |
| Gross Weight (LB) | 11.905 |
1.Payment by eBay approved method.
2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
3.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification.
2. The images shown are not the actual item and are for your reference only.
3. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. You have 30 days to contact us and 10 days to return it from the date it was received.
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)
Shop Category Hot Item
New List Item
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us default 10 |
2x Rear Shocks Gas For Infiniti FX35 2003 2004 2005 2006 2007 2008 Struts L & R
Fitment： 2003-2008 Infiniti Fx35 /Fx45
Package Included:2 Pcs Rear Shocks Struts Assembly (Left Right)
Premium Performance & Smooth Ride - Direct bolt-on replacement, perfect OEM fitment for easy installation - 100% Brand New & Strictly tested to meet or exceed OEM quality standards - Thickened steel structure with double chrome polished surface for rust corrosion resistance - Multi-stage internal valve design adapts to different speeds for smoother driving - Reduces vehicle bouncing, shaking and abnormal noise - Long service life with reliable durability for daily commute and highway driving
Why Choose Our Shock? - Restore your original factory ride comfort - Improve vehicle stability & reduce body roll - No modification needed, direct replacement
Note:
? HOW TO INSTALL : *Professional installation is highly recommended. *Wheel alignment is required after installation. Step 1: Before you lift the vehicle, loosen lug nuts one full turn.
Step 2: Jack up vehicle and use jack stands for safety & remove the tire from the rotor.
Step 3: (Wheel alignment is necessary after strut replacement.) Marking the position of all the bolts will help keep the alignment close to original and save time aligning. Use a colored pencil to mark the old strut on the bolt.
Step 4: Use penetrating oil (such as WD40) to coat any rusted fasteners, let soak for approximately 1 hour.
Step 5: (Optional) While waiting for oil to soak, take this time to inspect all other components that may need replacement (brake pads, rotors, brake hoses, ball joints, CV boots, tie rod ends, bushings, sway bars, etc).
Step 6: Remove any brake line or wire attachments from the strut body. Do not disconnect brake lines (if possible)! Opening brake lines will require bleeding of the brake system. Use extreme caution when removing brake lines from your struts, as any damage to your brake line can result in expensive and time consuming repairs.
Step 7: Remove sway bar attached to the strut assembly or control arm.
Step 8: Remove the tie rod (only if it attached to the body of the strut, if not leave it attached to the steering knuckle).
Step 9: Remove the strut to knuckle bolts at the bottom of the strut. On some vehicles, the brake caliper and rotor may need to be removed to gain access.
Step 10: Remove the upper mounting plate bolts located in the engine or trunk compartment. Do not remove the center retaining nut! It is not safe to unload the spring from the assembly in this position.
Step 11: Carefully remove the old strut assembly from the vehicle. Be very cautious not to let the strut "drop" down on your brake line, rotor or drum.
Step 12: Install the new Complete Strut Assembly in the reverse order as above (steps 11-6). Using an anti-seize compound on all fasteners is suggested.
Step 13: Carefully double check your work and make sure everything is tightened to manufacturer's torque specifications.
Step 14: Replace the tire the rotor and tighten to manufacturer's torque specifications.
Step 15: Slowly lower the vehicle down after removing the jack stands. Pay very close attention to any odd sounds when the vehicle is lowered onto the new Complete Strut Assemblies.
Step 16: It is very important that you immediately "road test" your vehicle right away to ensure that installation was done properly. Listen and feel for common signs of incorrect installation while driving slowly over speed bumps, rough road or potholes.
1.Payment by eBay approved method. 2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 3.Payment must be received within 10 days as auction ended or order might be delayed. 1. Orders processed within 24 hours of payment verification. 2. The images shown are not the actual item and are for your reference only. 3. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 1. You have 30 days to contact us and 10 days to return it from the date it was received. 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays) All rights reserved. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
