3PCS ESP32 ESP32-S3 Development Board Type-C WiFi+Bluetooth Internet of Things Dual Type-C Core Board ESP32-S3-DevKit C N8R2 Development Board ESP32-S3 Module

3PCS ESP32 S3 Development Board Type C WiFi Bluetooth IoT Dual Core DevKit C The ESP32-S3-DevKitC-1-N8R2 operates with an SPI voltage of 3.3V. This entry-level development board is built around the ESP32-S3-1 Wi-Fi + Bluetooth module. Most I/O pins from the module are accessible via pin headers on both sides of the board, facilitating easy connection to peripherals. You can interface using jumper wires or mount the board directly onto a breadboard. The board incorporates the ESP32-S3-DevKitC-1-N8R2 module, a general-purpose MCU that integrates full Wi-Fi and Bluetooth Low Energy functionality. For connectivity, a USB Type-A to Type-C cable or a CC cable is required. Please note that a standard USB A to Type-C charging cable, which only supports power delivery, cannot be used for data communication between the YD-ESP32-S3 and a host computer. Power can be supplied through either the board's USB-to-UART port or the dedicated ESP32-S3 USB port; one or both ports can serve as the default power source.