Oil Reset: When the service lamp on the instrument cluster is up, changed the oil, then turn off the oil light and reset the service mileage.

ABS Bleeding:When the ABS contains air, the ABS bleeding function is required to bleed the brake system to get a firm brake pad.

BMS Reset: When the battery shows aging or damage, need to re-match and registering the battery, then clear the fault codes from the dashboard and reset BMS module.

DPF Regeneration: The diesel filter will become clogged after a long time. Once the engine recognizes the DPF clogging, it will trigger regeneration. This function performs diesel filter cleaning to clear the blockage and reset the DPF light.

EPB Reset: It performs the maintenance of electronic parking brake systems. The brake pad reset is required to turn the MIL off after replace the brake pad.

Injector Coding: Write the new injector code to the ECU after replacement of injector so that the cylinder can identify the new injectors to lower fuel emissions.

SAS Calibration: The steering angle sensor is used to detect the rotation angle of the steering wheel. This function performs calibration for the steering angle sensor to clear fault memories of the steering angle sensor.

Throttle Adaptation: After clearing or repairing the electronic throttle, re-learning and adapt throttle sensor position is necessary to precisely adjust the throttle opening.

TPMS Reset: The tire pressure monitoring system can perform real-time automatic monitoring of various tire conditions. When the tire pressure is insufficient, need to perform tire pressure reset after replace the tire or sensors.

IMMO Keys function(All Keys Lost, Add Key, Reset Key): It supports add the new key and remotely disable the lost one when the key was lost to prevent your car from being stolen.

AT Set/Gearbox Matching: Perform complete the self-learning of the gearbox and improve the quality of shifting. After the gearbox is disassembled or repaired, it will cause problems such as shift delay. At this time, this function needs to be executed to make the gearbox automatically compensate according to the driving conditions to achieve a more ideal shift quality.

Gear Learning: In the case of replacing the engine ECU, crankshaft position sensor, crankshaft flywheel, or shows fault codes "tooth not learned", tooth learning must be performed.

Headlight Reset: Perform the initialization of the adaptive headlight system. The adaptive headlight system can determine whether to automatically turn on the headlights according to the intensity of the ambient light, and monitor the transfer speed of the vehicle to adjust the lighting angle of the headlights in a timely manner.

Suspension Calibration: This function can adjust the height of the vehicle. The following situations need to perform this function to adjust the vehicle height sensor for calibration: 1. After replacing the vehicle height sensor or control module in the air suspension system. 2. When the level of the car is wrong.

Sunroof Initialization: This function can set the sunroof to be locked off, close when it rains, the memory function of the sliding/tilting sunroof, the outside temperature threshold, etc. Initialize the sunroof when locked off or closed.