Full System Bi-directional Control Test/ Active Test
ANCEL DS160 allows you to use the scan tool temporarily activate or control a vehicle system or component and to check of the electronic components such as switches, sensors, relays, and actuators.
and supports the most commonly required service and coding features.

●Auto Bleed Test/ Automated Bleed
●ABS Pump Motor Test
●Fuel Injector Pump/ Fuel Trim Reset
●Window/Mirror/ Door Lock/ Horn
●Cycle A/C Clutch On/Off
●Air Conditioning Test
●Wiper Test
●Interior & exterior lights Test
●Sound horn Test
●Brake Bleed Preparation Test + ABS Manual Control Tests + Fuel ●Composition Reset + EVAP Test + Idle Relearn + Injector Buzz Test + Pump and Value Tests + VGT Turbo Calibration......

ECU Coding Only Fit For KIA:

ANCEL DS160 fit for KIA scanner tool support programming or data setting of the vehicle's modules to ensure that the new module matches the original car system, or restores the normal function of the module. Users can personalize various functions of the KIA vehicle, like adjusting the lighting configuration, enabling hidden functions, modifying driving mode parameters, etc., to enhance the personalization, performance and reliability of the car, maintaining KIA's consistently high quality driving experience.

ANCEL DS160 Support 30+ Reset Function :

1. Steering Angle Reset
Reset the steering angle to zero to keep the car running straight.

2. Injector Coding
Write the new injector code into the car system for the correct cylinder injection quantity.

3. IMMO
Disable any lost keys and add new keys. **ONLY for cars with an easy IMMO system.

4. DPF Regeneration
Especially works for D-P-F system with D-P-F regeneration, D-P-F component replacement teach-in and D-P-F teach-in after replacing the engine control unit.

5. A/C relearn
The vehicle air conditioner replaces the electronic control unit, replaces the actuator or the memory of the electronic control unit memory is lost, and requires air conditioning initialization learning.

6. ABS Bleeding
Help exhaust the air after repair the ABS pump system.

7. AdBlue Reset
Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

8. Throttle Matching
Initialize the throttle actuators to the default state.

9. TPMS Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

10. Tire Reset
Set the size parameters of the modified or replaced tire.

11. AFS Headlamp Reset
Initialize the adaptive headlamp system.

12. Sunroof Initialization
Initialize the sunroof when locked off or closed.

13. Battery Reset
Register the battery after replacement.

14. Seat Calibration
Calibrate the memory in replaced or repaired seats.

15. Oil Reset
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

16. A/F Reset:
Set or learn Air/Fuel ratio parameters.

17. GEARBOX LEARN
Help complete the gearbox self-learning to improve gear shifting quality.

18. Transport Mode
Deactivate the transport mode.

19. Windows Calibration
Perform door window matching to recover ECU initial memory.

20. Language Change
Change vehicle system language.

21. Suspension Reset
Adjust the vehicle body height sensor for level calibration.

22. NOx Sensor Reset
Reset catalytic converter learned value stored in ECU.

23. Stop/Start Reset
Set up the automatic start-stop function in ECU.

24. Coolant Bleeding
Activate the electronic water pump.

25. Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.

26.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
..........

ANCEL DS160  Support Full OBD2 Functions:
Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

4 In 1 Live Data Graph & One-Click WiFi Update: 

One-Click touchscreen operation to Send/Share/Print vehicle health report via E-mail/Bluetooth/WiFi/Printer. The 2GB+32GB memory data management save your reports for playback. Intuitive view of 4 in 1 data stream to show the vehicle conditions in text and graph to help you to analyze the abnormal parameter easily. Also you can one-click free wifi update online to enjoy the newest software anytime.

ANCEL DS160 Support Vehicle Coverage: Only Fit for KIA/Fit For HYUNDAI

Supports Multi-language
Korean, Spanish, Portuguese, French,Swedish, English, Dutch, Japanese, Italian, German,Russian, Greek.....

ANCEL DS160 Package list
DS160 main unit
Diagnostic Cable
USB TYPE C Cable
Quick Start Guide
User’s Manual