ANCEL JC200 2-Cylinder Injector Cleaner Tester Machine for Car & Motorcycles, Pressure Adjustment ,Built-in Air Pump , Compatible with Φ9–14.5mm injectors, suitable for most 6V&12V gasoline vehicles and motorcycles. Faster, Smarter, Better
ANCEL JC200 2-Cylinder Injector Cleaner Tester Machine for Car & Motorcycles,Pressure Adjustment ,Built-in Air Pump , Compatible with Φ9–14.5mm injectors, suitable for most 6V&12V gasoline vehicles and motorcycles. Faster, Smarter, Better
🔥 Main Functions ✅ (1) Uniformity test: to check uniformity of the injections. ✅ (2) Atomization observation: with help of the backlight, you can observe the spray atomization situation of the injector in a comprehensive and careful manner. ✅ (3) Tightness test: it can detect the tightness and dropping of the fuel injector under working pressure. ✅ (4) Fuel injection volume detection: it can detect the fuel injection volume of the injector under specific working conditions.
🔥 Main Features ✅ (1) Low-cost solution of injection test. ✅ (2) Use pressurized air to push test fluid, ensure stable pressure output, achieve consistence in test conditions. ✅ (3) DC12V power supply, enhance portability of the product. ✅ (4) The oil tank liquid level is displayed visually, and the test agent can be recycled. ✅ (5) Bright background light, you can clearly see the various situations of the fuel injector when it is working. ✅ (6) Replaceable composite joints for different injector type.
🔥 Packing List: 1X Main Unit 1X Power Cord 1X Signal Cord 1X Base Plate 1X Lock Thread 1X Lock Nut 1X Fuel Distribution Rail 2X Glass measuring cylinder 2X Ф9-11.3 adapter w/z 0-ring 2X Ф11-12.8 adapter w/z 0-ring 2X Ф13-14.5 adapter w/z 0-ring 2X Ф10 washer 2X Ф14 washer 1X Block screw
🔥 Operating Instructions ✅ 1. Button Functions: a) -: Time adjustment / Speed adjustment. b) +: Time adjustment / Speed adjustment. c) MODE: Mode key, cycles through modes (Manual mode M, Automatic mode A). d) START: Start/Stop key, short press to start when stopped, short press to stop when running. ✅ 2. Indicator Functions: a) M: Manual mode. b) A: Auto Mode. ✅ 3. Operation Instructions: a) In stopped state, briefly press “MODE” to switch to M mode. Use “+/-” keys to adjust output speed (range: 100-9900 RPM). Briefly press “START” to activate operation at set speed. b) In stopped state, briefly press “MODE” to switch to A mode. Use “+-” keys to adjust timer duration (30-600 seconds). Briefly press “START” to activate. Speed automatically adjusts within 500-6000 RPM range at +/-100 RPM increments every 0.5 seconds, stopping automatically upon countdown completion.
On May 20, 2026 at 09:45:37 PDT, seller added the following information:
Similar Listings
Fuel Injector Cleaning And Testing Machine Fuel Injectors Cleaning Sprayability
Fuel Injector Cleaner Kit Injection System Cleaning Machine Injectors Tester