This is the AccuSpark® red Rotor Suitable all Lucas 25D 4 cyl, distributors
Typically 25d Distributors are fitted to up to about 1974
A little more expensive than a standard rotor the AccuSpark
Red Rotor™ comes with a number of benefits that we will guarantee for 1 years .
Is made from Polypropylene, a thermoplastic polymer.
As an engineering grade plastic it
exhibits superior mechanical and thermal properties in a wide range of conditions
The Accuspark rotor is less conductive (less chance of arcing ) and made to higher tolerances than original
for a better fit The most reliable rotor on the market by far .Developed and designed Based on original Lucas Design
Recently manufactured rotor arms have been failing due to poor design and cheap materials. Notably, the rivet which holds the brass inlay into the moulding has proved to be an unreliable method of construction. The high tension current, averaging 30,000 volts, is always looking for the easiest route to earth and shorts down through the rivet.
Based on the original, more reliable 1960’s design, but made from modern engineering grade polypropylene with the latest manufacturing techniques to high tolerances.
These LUCAS STYLE RED ROTOR ARMS will not let you down.
The brass contact is inlaid to dispense with the troublesome rivet used on most versions, this rivet can run very close to the centre cam and is known to cause failure by short-circuiting.
The superior insulation of the body makes them suitable for use with Electronic ignitions and high output coils
The new spring steel clip, in conjunction with a revised high manufacture tolerance, assures a really good fit.
Important Next Day Postage Notice :
Next day Yodel Postage is only Available for
Mainland UK lowlands, for other areas please email
