2. Support Full systems basic function system (read code, clear code, read data stream);
3. support 15 maintenance functions -- Oil (maintenance light zeroing), EPB (brake pad replacement), SAS (steering angle learning), ETS (throttle learning)), battery reset, DPF function, ABS bleeding, airbag reset, headlight matching, start-stop setup, seat calibration and so on.
4. Support All OBDII function of 9 OBD modes of OBD2/EOBD protocol which is standardized
5. Battery voltage detection function (display battery voltage)
6. 3 Years Free Update
7. 4-in-1 data flow display (graphical data flow display)
8. Diagnostic report can be sent to the customer by e-mail.
9. Support output PDF report to print
10. support intelligent vin diagnosis function (Autosearch)
11. support screen recording function
12. Support screenshot function
13. support diagnosis feedback
14. support language 19 countries: English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Dutch, Hungarian, Slovak, Greek, Arabic, Czech, Polish, Chinese traditional, Korean, Turkish, Danish)
Product Parameter
CPU: CORTEX-A7 1.3GHz 4-core
Memory：2GB+32GB
Screen：5 inches 854*480
Working Voltage: 5V
Working Current: ≤ 2.5A
Working Environment: 0°C ~ 50°C (32°F ~ 122°F)
5.0" Touch Screen
2GB RAM
32GB ROM
1500mAh Battery
Wifi：802.11 a/b/g/n
Android OS
Package List
15 + Maintenance Functions
With 15 Maintanence Function : AdBlue Reset, Airbag Reset, A/F Reset, ABS Bleeding, Battery Matching, Gearbox Relearn, Brake Reset, DPF Regen, Electric Throttle Relearn, Injector Coding, NOx Sensor Reset, Oil Maintenance Reset, Steering Angle Reset, and TPMS (Reset)
1. Oil Maintenance Reset : reset the o.il service lamp after changing the engine o.i.l; re-calculate the optimal o.i.l life change interval for the engine o.i.l maintenance being on schedule.
2. ABS Bl-eeding: removes a ir from the ABS brake lines for firm braking and safety.
3. Adblue Reset: reset the AdBlue system after refilling the tank to ensure the engine is running properly and meeting standards.
4. A.irbag Reset: Resets a irbag system after replacement or fault repair.
5. A/F Reset: adjusts the ratio for optimal engine capability and effi.ciency.
6. BMS Matching : register the battery after replacement.
7. Gearbox Reset: help complete the gearbox self-learning to improve gear shifting quality.
8. EPB Brake Reset: help replace and reset the brake pad.
9. DPF Regeneration (**for both diesel and gasoline vehicles): keep the trap stable.
10. Throttle Adaptation: initialize the throttle actuators to the default state.
11. Injector Coding: write the new code into the car system for the correct cylinder injec-tion quantity.
12. SAS Reset: reset the steering angle to zero to keep the car running straight.
13. TPMS Reset: reset the tire pressure.
14. Gear Learning: resets the transmission for smoother shifting and optimal capability.
15. N.O.x Sen.sor Reset: Resets the ni.tro.gen o.xide sen.sor after replacement or repair.
OE-Level Full System Scan & Diagnostic for Most OBDII/EOBD Vehicles
This option allows you to detect whether the car full system parameters are normal or not. It mainly including Drive System, Chassis System, Body System, Electrical system.
1.PCM(Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Fuel Pump, Gear, and more...
2. Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS and more...
3. BCM(Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition.Electric Windows, Telephone, and more...
4. Electrical System: Including Centralized control system for engine and power transmission, Chassis integrated control and safety system,Intelligent body electronic system,Communication and information / entertainment system. Read and erase codes for all available systems, turn off MIL light (Indicator light), display live data in text, graph & analog for easy data review.
ALL 10 Mode OBDII/EOBD Functions:
Mode 01-Request current powertrain diagnostic data.
Mode 02-Request freeze frame information.
Mode 03-Request emissions-related diagnostic code
Mode 04-Clear/reset emissions-related diagnostic information.
Mode 05-Request oxygen sensor monitoring test results.
Mode 06-Request on-board monitoring test results for specific monitored systems.
Mode 07-Request emission-related diagnostic troublecodes detected during current or last completed driving cycle
Mode 08-Request control of on-board system, test or component.
Mode 09-Request vehicle information.
Mode 0A-Request emissions-related diagnostic troublecodes with permanent status after a clear/reset emission-related diagnostic information.
Cover 99% Global Car 100000+ Vehicles Supports
American cars: after 1996-newer
BUICK, CADILLAC,CHEVROLET, CHRYSLER, DODGE, FIAT(BRAZIL), FORD, FORD(AUSTRALIA) , GM. JEEP, LINCOLI, GM(BRAZIL)
European car:after 2002-newer
ABARTH,ALFA ROMEO,AUDI, BENTLEY,BMW,BUGATTI,CITROEN, DACIA,EUROFORD, FERRARI, FIAT, GAZ, OPEL(SOUTHAFRICA),IVECO.JAGUAR,LAMBORGHINI,LANCIA,LANDROVE,MASERATI,MAYBACH,,MERCEDES,MINI,OPEL,PEUGEOT,PORSCHE,RENAULT, ROLLSROYCE,ROVER,SAAB,SEAT,SKODA,SMART,SPRINTER, ,VAUXHALL,VAZ,VOLVO,VW ,ASTONMARTIN,UAZ
Asian cars：after 2002-newer
ACURA,DAEWOO,DAIHATSU,HOLDEN(AUSTRALIA),HONDA,HYUNDAI,INFINITI,ISUZU, KIA,LEXUS,LUXGEN,MAHINDRA,MAHINDRA(INDIAN),MARUTI,MARUTI(INDIAN),MAZDA,MITSUBISHI ,NISSAN,GTR(NISSAN),PERODUA,PERODUA (MALAYSIA,PROTON,PROTON(MALAYSIA,SAMSUNG,SAIPA,SSANGYONG,SUBARU,SUZUKI,TATA,TATA(INDIAN), TOYOTA ,UNITED PAKISTAN
Chinese car：after 2008-newer
BRILLIANCE,BYD,CHANGAN,CHANGHE,CHBUICK,CHERY,CHANGHE,SUZUKI,DFCIROEN,ECUAID,FAW(TIANJIN FOTON,GONOW,GWM, HAFEI,HAIMA,JAC,JAC,REFINE,JMC,JOYLONG,LIFAN
,MG(SAIC,QOROS,MAXUS,SGM,SGMW,XINKAI,POLARSUN,ZX,AUTO,ZOTYE,SENOUA(BAIC)
19 Language Supports
English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Dutch, Hungarian, Slovak, Greek, Arabic, Czech, Polish, Chinese traditional, Korean, Turkish, Danish)
Language Setting
Once the DLC is connected, the device will automatically power on. For first-time use, the first step is to set the language. The default language of the device is English. If you want to change the language, please proceed to the next step and connect to Wi-Fi to download the latest diagnostic software for the selected language.
Consult
OBD Fault Code Library: Use the OBD fault codes generated during the diagnostic process to query detailed fault descriptions.
Coverage Lists: Quickly check the supported models and functions available on the current device.
Learning: Access video tutorials that provide guidelines for equipment usage, maintenance, and diagnostics.
Video: Watch instructional videos that demonstrate how to operate the device effectively.
User Manual: Helps technicians quickly understand how to use the device and improve diagnostic capabilities efficiently .
Feedback
This function allows you to provide feedback when encountering diagnostic errors with certain vehicle models. These errors may result from undeveloped software features or incorrect diagnostic commands sent by the device. Please follow the prompts to send the latest diagnostic logs and error descriptions via Wi-Fi, enabling our team to analyze the issue, make improvements, and update the vehicle diagnostic software.
FAQ
Here we list some frequently asked questions and answers related to this device.
5.1 Q: Why is there no response when the device is connected to a vehicle?
A: Ensure the connection to the vehicle's diagnostic port is proper, the ignition switch is on, and that the device supports the vehicle.
5.2 Q:Why does the system freeze while reading the data stream?
A: This could be due to a loose diagnostic connection. Please unplug the connector and reconnect it firmly.
5.3 Q: Why is there a communication error with the vehicle's ECU?
A: Please check the following:
* Ensure the diagnostic connector is properly connected.
* Confirm that the ignition switch is ON.
* If everything appears normal, please use the Feedback function to send us the vehicle's year, make, model, and
VIN number.
5.4 Q: Why does the screen flicker when the engine starts?
A: This is normal and is caused by electromagnetic interference.
5.5 Q:How do I upgrade the system software?
A: 1.Start the device and ensure a stable Internet connection.
2.Go to "Settings" -> "App Update," click "OTA," and then select "Check Version" to access the system upgrade
interface.
3.Follow the on-screen instructions to complete the upgrade. It may take a few minutes. After the upgrade is
successfully completed, the tool will automatically restart and return to the main interface.
