These bits are ideal for rounding over and trimming countertop edges after the bowl is mounted. They can be used in conjunction with the CMT 8/980.551.11 bevel cutter for a flush cut-out between the countertop and the installed undermount bowl. Suitable for use on hand-held routers, these bits feature a non-marring Delrin® bearing to protect both the finished edges and surrounding surfaces.

CMT carbide tipped router bits produce flawless profiles due to the following features:

SUPERIOR HIGH STRENGTH STEEL BODIES: CMT uses only high-quality, solid bar stock sourced from Switzerland, which provides exceptional resistance to fatigue and abrasion. Larger diameter bodies are heat forged before turning into precise bit bodies. This extra step produces a radial grain orientation which offers large diameter bits extra strength and durability. All machining fully automated ensuring the shanks and bodies are accurate and perfectly balanced.

ANTI-KICKBACK DESIGN: This design controls the depth of cut and minimizes the chance of kickback, reducing your risk of injury.

SINTERHIP HI-DENSITY INDUSTRIAL CHROME CARBIDE: CMT uses specially formulating chrome carbide specially designed to cut wood and laminates. A new process called SinterHIP (Hot Isostatic Pressing), helps prevent material failure and increases cutting life.

TRI-METAL BRAZING: CMTs silver-copper-silver brazing “sandwich” provides a tight bond between the steel and the carbide, with a shock absorbing effect to protect the carbide tips when cutting harder woods and reduces the chance of failed welds.

NON-STICK ORANGE SHIELD COATING®: Prevents bit from heating up, reduces pitch build-up, protects against corrosion, and provides a longer bit life.



SKU: 880.541.11
Shank Diameter: 1/2"
Type: Edging/Profile Bits
Diameter: 2-1/8"
Length: 3-5/64"
Radius: 1/2"
Cutting Length: 1"
Cutting Angle: 18°
Maximum Stock Thickness: 3/4"
Set: No

⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov