|
|
|
|
|
|
|
|
Vehicle Compatibility Information
For Dodge Caliber - 2010-2011 L4 2.0L
For Dodge Caliber - 2010-2011 L4 2.4L
For Jeep Compass MK 2009-2011 L4 2.0L
For Jeep Compass MK 2012 L4 2.0L FWD
For Jeep Patriot MK 2009-2012 L4 2.0L FWD
Note: Automatic CVT Trans. or with 5 Speed Manual Trans.
For Dodge Caliber - 2007-2009 L4 1.8L with 5 Speed Manual Trans.
For Dodge Caliber - 2007-2009 L4 2.0L Automatic CVT Trans.
For Dodge Caliber - 2012 L4 2.0L Automatic CVT Trans.
For Dodge Caliber - 2007-2009 L4 2.4L Automatic CVT Trans.
For Jeep Compass MK 2007-2008 L4 2.0L
For Jeep Compass MK/MP 2013-2017 L4 2.0L FWD
For Jeep Compass MK 2007-2011 L4 2.4L
For Jeep Compass MK 2012 L4 2.4L 4WD or FWD
For Jeep Compass MK/MP 2013-2017 L4 2.4L 4WD, Automatic CVT Trans.
For Jeep Patriot MK 2007-2008 L4 2.0L FWD
For Jeep Patriot MK/MP 2013-2017 L4 2.0L FWD, Automatic CVT Trans. or with Manual Trans.
For Jeep Patriot MK 2007-2009 L4 2.4L FWD
For Jeep Patriot MK/MP 2010-2013 L4 2.4L 4WD or FWD
For Jeep Patriot MK 2014-2015 L4 2.4L 4WD, Automatic CVT Trans.
For Jeep Patriot MK 2016-2017 L4 2.4L 4WD or FWD
What Are The Signs Of a Failing CV Axle?
You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.
The steps and tools needed for an CV axle replacement
This is a challenging and technical project
Tool List
Jack
Jack stands
Automotive tool set (pliers, screwdrivers, sockets)
Pry bar
Lubricant
Brake Cleaner
Hammer or mallet
Impact wrench (optional)
CV axle replacement
Pro Tip
Additional specialized tools such as tie-rod end pullers, ball joint removers, and vehicle-specific sockets may be required
1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions.
Tip: Leave one side assembled while you work on the other so you can remember how things go back together.
2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue.
3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose.
4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly.
5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals.
6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way.
7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.
Noticed
-Instruction is not included. Professional installation is recommended
-Accessories: You will get exactly showing in the picture
-Please confirm your original part number before purchasing
-Please Send us a message for anything we can help you with
We will only ship to the confirmed shipping address given with the payment.
We do not offer local pickups.
1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
2. The images shown are not the actual item and are for your reference only.
3. Fast shipping:All our packages use USPS Package Service
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. You have 7 days to contact us and 10 days to return it from the date it was received.
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
We are always been trying to provide best service and reliable products for every customer.
If you are satisfed with the product you recieved,please leave us positive feedback.
If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.
Shop Category
Hot Item
New List Item
|
CV Axle Assembly For Dodge Caliber 1.8L 2007-2009 Front Driver
Vehicle Compatibility Information For Dodge Caliber - 2010-2011 L4 2.0L
What Are The Signs Of a Failing CV Axle? You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.
The steps and tools needed for an CV axle replacement This is a challenging and technical project Tool List Jack Jack stands Automotive tool set (pliers, screwdrivers, sockets) Pry bar Lubricant Brake Cleaner Hammer or mallet Impact wrench (optional) CV axle replacement Pro Tip 1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions. Tip: Leave one side assembled while you work on the other so you can remember how things go back together. 2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue. 3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose. 4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly. 5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals. 6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way. 7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.
Noticed -Instruction is not included. Professional installation is recommended -Accessories: You will get exactly showing in the picture -Please confirm your original part number before purchasing -Please Send us a message for anything we can help you with We will only ship to the confirmed shipping address given with the payment. We do not offer local pickups. 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 2. The images shown are not the actual item and are for your reference only. 3. Fast shipping:All our packages use USPS Package Service 4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 1. You have 7 days to contact us and 10 days to return it from the date it was received. 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. We are always been trying to provide best service and reliable products for every customer.
Copyright of autoutdoor. All rights reserved. |
