See pictures for an example of what you
will receive.
One (1)
Aftermarket Security Installed System
remote keyless entry fob alarm controller
Transmitter control clicker keyfob controller
replacement
Code Alarm
|
FCC
ID#: H5OT45
Alternate Spelling: H50T45
Part
#: CATX-1B
LED
LIGHT: Red
Buttons: 1;
Car Vehicle Engine Starter
Frequency:
434 MHz
Battery:
1; CR2032
See Item Specifications for more details
|
|
Compatible With the following Aftermarket
installed security systems:
CA4050, CA4051, CA4053,
CA4054, CA4552, CA4553, CA4554, CA4055, CA4555, Panther PA420C &
41800252
Made for the following Code Alarm Type 9 systems: - CA100
- CA1045
- CA1050
- CA1051
- CA1053
- CA1055
- CA1150
- CA1151
- CA1153
- CA1155
- CA1550
- CA1551
- CA1552
- CA1553
- CA1B
- CA1B5
- CA1BTW
- CA1BTW5
- CA2050
- CA2051
- CA4051
- CA4053
- CA4054
- CA4055
- CA4552
- CA4553
- CA4554
- CA4555
- CA5050
- CA5051
- CA5053
- CA5054
- CA5055
- CA5150
- CA5152
- CA5153
- CA6151
- CA6153
- CA6550
- CA6551
- CA6552
- CA6553
Replaces the following Code Alarm remotes: - CAT1
- CAT1MTW
- CAT4P
- CATX1B
- CATX1TW
- CATX4
- CATX50
- CATX100
- CATXMLC
- CATXMT
- CPL100TX
- TCBMLC
- TCBMT
- TCBTX4
|
|
Programming: Standard Programming: This method is used to program additional or replacement transmitters. Before you begin, have all transmitters which are to operate the system at hand. - Turn the ignition key to the on position..
- Press and HOLD the valet/programming switch. Parking lights will flash 3 times. Release the Button.
- Press the Lock or Start button of each transmitter you want programmed. You will see 1 light flash from each accepted transmitter.
- Turn the ignition switch off.
NOTE: Please make sure you have a working control unit installed in the vehicle prior to ordering this remote control. Programming instructions are listed above and will require accessing your valet/programming switch.
Programming
Instructions:
Turn the ignition ON.
Press
and hold the valet/override button.
Within
10 seconds the system will chirp (3) three times.
Press 1
button of each transmitter you wish to program.
The
system will respond with 1 light flash for each accepted transmitter.
Pressing the override button at any time during programming will
advance to the next bank.
NOTES:·
The system will exit transmitter programming after 15 seconds of
inactivity.
·
This system has 1 button programming which programs all channels of
the system.
· The
system will hold up to 4 transmitters i
|
How to find out if this remote is compatible with
your Vehicles’ installed RKE System
If you're not sure your vehicle can use this
remote, please ask questions or contact your local dealer first.
1. Check the back of your current or
old keyless remote to match FCC ID /Part #’s.
2. Contact your local dealer and tell
them your VIN# and ask what part # / FCC ID you need.
Your
vehicle will be installed with one of the following keyless entry systems:
a. Standard Keyless Remote
Packages: Installed at time of manufacture.
b. Optional Keyless Remote Packages: Installed by a
dealer.
c. Aftermarket Keyless
Remote Packages: Installed by previous owner or a car/audio shop.
d. No remote keyless entry system at all.
The
above information can change which remote you need
for your installed remote keyless system.
Payment: We accept
payment via PayPal or Credit Card. Please contact us via eBay messages for any
questions concerning payments. Payment is expected within 5 days.
PA SALES TAX: As per the
State of PA Franchise Board we must collect sales tax from PA Residents for any
purchase made from our store.
Contact/Email: Due to scams etc,
we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages
& Best Offers are checked throughout the day & we typically respond 7
days a week. Please contact us with questions via eBay messages (keyless4u).
100%
Guarantee Remote Shipping / Return Policy
Warranty/Returns:
- We
have a 30 day return policy.
- All
returns for replacements and refund need an RMA #.
- Please
contact us before returning items so we can give you the RMA # and
the proper return address.
- No
refunds / replacements will be granted without an RMA#
We ensure proper working condition of
all previously used or new remotes through a serious of tests performed with
the Santronics Testing device. Each button is tested for functionality prior to
shipment and then logged.
Please Note: Each remote and
circuit board is UV id’d prior to shipment – All returns receive a UV ID
inspection to verify originality of remote sent prior to refund or replacement.
Does this keyless remote entry come with a
battery?
Yes. It will have a working battery
installed.
Battery Condition:
A. All remotes sold on Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply
working.
Some are new and some are used.
