We stand behind every product we sell.
All of our brand new items come with a 30-Day money-back or exchange guarantee.
Cooling Fan and Radiator Condenser Assembly For 2007-2011 Jeep Wrangler 3.8 MT
$188
DESCRIPTION
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cooling Fan and Radiator Condenser Assembly For 2007-2011 Jeep Wrangler 3.8 MT
Fits:
2007-2011 Jeep Wrangler V6 3.8 Manual Transmission A/C Condenser
Features:
Easy Installation
High flow design provides long lasting, efficient cooling
Factory lubricated for long life
Precision ground shaft and hub accept fan clutches perfectly
Quality forged housing is specially formed to ensure maximum coolant flow
Precision built and balanced - Pressed on impeller increases water flow
Unitized seal protects bearings - Provides long life and leak free performance
The Radiator cooling fan is an integral part of your car that is responsible for cooling the Radiator of your car. The Radiator cooling fan does this by either pulling or pushing air into the Radiator keeping the Radiator temperatures within the safe levels. A damaged Radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a Radiator cooling fan.
Note:
It is recommended to replace your Radiator Fan Clutch & Water Pump at the same time. The two parts age at the same rate so if one has failed, the other is probably not far behind. The fan clutch and water pump are also connected by the same shaft. When one part fails it typically affects the operation of the other. To prevent premature failure of your new unit, it is wise to replace both at the same time.
Radiator Notes:
Specification:
Core Material: Aluminum
Tank Material: Plastic
Quantity: 1pcs Radiator
Warranty:1 Year limited
Direct Replacement
100% brand new Radiator (as picture showed)
--------------------------------------------
? Installation guidelines provided in the box
? Premium OE hardware and fittings included in every box
? OE design to ensure exact fit, form and function for an easy drop-in installation
? Maximum cooling efficiency and perfect fit
? Leak-tested aftermarket Radiator
? SO 9001 certified manufacturing plants
How to replace a new Radiator?
1. Disconnect the battery.
2. Drain the Radiator fluid into a suitable container.
3. Remove the old Radiator:
-Take off any plastic covers around the Radiator.
-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
-Disconnect the Radiator hoses from the Radiator.
-Disconnect the transmission cooling lines from the bottom of the Radiator.
-Remove any clamps, brackets, or screws holding the Radiator inside its frame.
-Lift the Radiator up and out of the car.
4. Install the new Radiator:
-Slide the new Radiator into place.
-Connect any clamps or brackets that hold the Radiator in place.
-Connect the transmission cooling lines carefully.
-Connect the engine cooling hoses to the Radiator.
-Replace the fan and fan shroud.
-Reconnect the fan electrical connection.
-Replace the plastic covers.
5. Fill the Radiator with fluid.
6. Check your work to make sure that there are no leaks.
(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)
Note:Do please keep children and pets away when replacing the Radiator)
-----------------------------------------------------------------------------
Attention:
? project operation, the vehicle normal temperature 60 to 80 degrees.
? add detergent if the tank is too full can take some antifreeze.
Information About AC Condenser
1.Such condensers typically also use a fan to force air through the heat sink and away from the tropics. Refrigeration principle of the general refrigerator The function of the compressor is to compress the steam with lower pressure into steam with higher pressure, so that the volume of the steam is reduced and the pressure is increased.
2.The compressor draws in the lower pressure working fluid vapor from the evaporator, causes the pressure to rise, and then sends it to the condenser, which is condensed into a higher pressure liquid in the condenser, and is throttled after the throttling valve becomes a pressure. After the low liquid is sent to the evaporator, it absorbs heat in the evaporator and evaporates to become a lower pressure steam, thereby completing the refrigeration cycle.
| Item Specifics | |
|---|---|
| Manufacturer Part Number : | IG848350CO |
| Brand : | Ignition |
| Fitment Type : | Direct Replacement |
| Warranty : | 1 Year |
| Condition : | New |
| UPC : | Does not apply |
| Custom Bundle : | No |
| Placement on Vehicle : | Front |
| Type : | Cooling Fan and Radiator Condenser |
| Interchange Part Number : | Cooling Fan and Radiator and Condenser |
| Other Part Number : | Radiator Cooling Fan Assembly,Single Fan |
| Superseded Part Number : | Manual Transmission A/C Condenser |
| Listing Include : | 1X Cooling Fan,1X Radiator,1X Condenser |
| Voltage : | 12V |
| Fan Type : | Radiator Cooling Fan Assembly |
| Fan Placement on Vehicle : | Driver Side/LH |
| Radiator Height(inch) : | 21.9685039370079 |
| Radiator Width(inch) : | 20 |
| Radiator Thickness(inch) : | 0.866141732283465 |
| Condenser Height(inch) : | 28.74 |
| Condenser Width(inch) : | 17.12 |
| Condenser Thickness(inch) : | 4.52 |
| Condenser Material : | Aluminum |
| Radiator Core Material : | Aluminum |
| Radiator Tank Material : | Plastic |
| Condenser Weight(lbs) : | 3.05 |
| Transmission Inlet Fitting Design(condenser) : | Block Fitting |
| Outlet Fitting Design Block(condenser) : | Block Fitting |
| Radiator Core Type : | Crossflow |
| Condenser Core Type : | Parallel Flow |
| Transmission Inlet Fitting Design(Radiator) : | |
| Outlet Fitting Design Block(radiator) : | |
| Radiator Row : | 1 |
| Condneser Inlet Diameter : | |
| Radiator Inlet Diameter : | 1.5 |
| Condenser Outlet Diameter : | |
| Radiator Outlet Diameter : | 1.5 |
Shipping
1.Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
2.USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
3.We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
4.Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
5.Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more.
Warranty
1.The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS.
2.VAP-AUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.
3.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues within 60 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.
4.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues after 60 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.
5.VAP-AUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.
Return
Feedback
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive Feedback is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Warning
Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.
Best Sales
Newly Listed
Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us |
Cooling Fan and Radiator Condenser Assembly For 2007-2011 Jeep Wrangler 3.8 MT
Fits:
2007-2011 Jeep Wrangler V6 3.8 Manual Transmission A/C Condenser
Features:
Easy Installation High flow design provides long lasting, efficient cooling The Radiator cooling fan is an integral part of your car that is responsible for cooling the Radiator of your car. The Radiator cooling fan does this by either pulling or pushing air into the Radiator keeping the Radiator temperatures within the safe levels. A damaged Radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a Radiator cooling fan.
Note: It is recommended to replace your Radiator Fan Clutch & Water Pump at the same time. The two parts age at the same rate so if one has failed, the other is probably not far behind. The fan clutch and water pump are also connected by the same shaft. When one part fails it typically affects the operation of the other. To prevent premature failure of your new unit, it is wise to replace both at the same time.
Radiator Notes: Specification: Core Material: Aluminum Tank Material: Plastic Quantity: 1pcs Radiator Warranty:1 Year limited Direct Replacement 100% brand new Radiator (as picture showed) -------------------------------------------- ? Installation guidelines provided in the box ? Premium OE hardware and fittings included in every box ? OE design to ensure exact fit, form and function for an easy drop-in installation ? Maximum cooling efficiency and perfect fit ? Leak-tested aftermarket Radiator ? SO 9001 certified manufacturing plants
How to replace a new Radiator? 1. Disconnect the battery. 2. Drain the Radiator fluid into a suitable container. 3. Remove the old Radiator: -Take off any plastic covers around the Radiator. -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly. -Disconnect the Radiator hoses from the Radiator. -Disconnect the transmission cooling lines from the bottom of the Radiator. -Remove any clamps, brackets, or screws holding the Radiator inside its frame. -Lift the Radiator up and out of the car. 4. Install the new Radiator: -Slide the new Radiator into place. -Connect any clamps or brackets that hold the Radiator in place. -Connect the transmission cooling lines carefully. -Connect the engine cooling hoses to the Radiator. -Replace the fan and fan shroud. -Reconnect the fan electrical connection. -Replace the plastic covers. 5. Fill the Radiator with fluid. 6. Check your work to make sure that there are no leaks. (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan) Note:Do please keep children and pets away when replacing the Radiator) ----------------------------------------------------------------------------- Attention: ? project operation, the vehicle normal temperature 60 to 80 degrees. ? add detergent if the tank is too full can take some antifreeze.
Information About AC Condenser 1.Such condensers typically also use a fan to force air through the heat sink and away from the tropics. Refrigeration principle of the general refrigerator The function of the compressor is to compress the steam with lower pressure into steam with higher pressure, so that the volume of the steam is reduced and the pressure is increased. 2.The compressor draws in the lower pressure working fluid vapor from the evaporator, causes the pressure to rise, and then sends it to the condenser, which is condensed into a higher pressure liquid in the condenser, and is throttled after the throttling valve becomes a pressure. After the low liquid is sent to the evaporator, it absorbs heat in the evaporator and evaporates to become a lower pressure steam, thereby completing the refrigeration cycle.
Shipping
1.Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
2.USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
3.We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
4.Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
5.Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty
1.The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS.
Return
We stand behind every product we sell. All of our brand new items come with a 30-Day money-back or exchange guarantee. Feedback
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive Feedback is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Warning
Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time. Copyright of VAP-AUTOPARTS. All rights reserved. |
