Tips

The following inspections and maintenance procedures can help prevent potential brake problems:
                  

                    
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
                    
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
                    
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
                  
The following should be conducted by a qualified technician:
                  

                    
Inspection of the brake hoses for brittleness or cracking.
                    
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
                    
Inspection of wheel bearings and grease seals.
                    
Parking brake adjustments (as needed).
                  

FAQ

                  

                    
Do I have to replace all my brake parts when replacing my brake pads?
                    
No, but it is a good idea to inspect them for wear-out, cracking, leaking, etc.
                    
Does ACDelco offer other grades of brake pads?
                    
Yes, ACDelco also offers GM OE Brake Pads and Professional Brake Pads.
                    
Do I have to replace my brake pads after a certain amount of time?
                    
No, but it is a good idea to inspect your brake pads at each tire rotation.
                  

Troubleshooting

                  

                    
Brake pedal pulsation (not to be confused with normal ABS operation).
                    
Vehicle pulls to the left or right when brakes are applied.
                  

Downloads

Warranty