We stand behind every product we sell.
All of our brand new items come with a 30-Day money-back or exchange guarantee.
Downstream O2 Oxygen Sensor for Volvo S80 S60 XC60 V50 XC70 XC90 Land Rover LR2
$18
DESCRIPTION
|
|
||||||
|
|
|
|
|||
Downstream O2 Oxygen Sensor for Volvo S80 S60 XC60 V50 XC70 XC90 Land Rover LR2
Please check fitment notes & description for accurate information.
Land Rover LR2 3.2L 2008-2012
Land Rover LR3 4.4L 2005-2006
Land Rover LR4 5.0L 2010-2013
Land Rover Range Rover 4.4L 2006-2009
Land Rover Range Rover 5.0L 2010-2012
Land Rover Range Rover Sport 4.4L 2006
Land Rover Range Rover Sport 5.0L 2010-2013
Volvo S40 2.4L 2004-2010
Volvo S60 3.0L 2011-2016
Volvo S80 3.0L 2008-2015
Volvo S80 3.2L 2007-2014
Volvo S80 4.4L 2007-2010
Volvo V50 2.4L 2005-2010
Volvo V60 3.0L 2015-2016
Volvo V70 3.2L 2008-2010
Volvo XC60 3.0L 2010-2016
Volvo XC60 3.2L 2010-2015
Volvo XC70 3.0L 2009-2015
Volvo XC70 3.2L 2008-2015
Volvo XC90 3.2L 2008
Volvo XC90 4.4L 2005-2011
Oxygen Sensor's Location:
How do I know the O2 sensor is good or not?
-
Check engine light on
-
A reduction in fuel economy.
-
Your catalytic converter fails unexpectedly
-
Exhaust emissions reach undesirable levels.
How to install the oxygen sensor?
Step 1 - Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts.
Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal.
Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached.
Step 4 - Its important that the wiring harness connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement sensors have a universal electrical connector that must be configured to the wiring of the old sensor.)
Step 5 - Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends.
Step 6 - Gently tighten the sensor while keeping wiring free from damage, these sensors need to be fairly snug to avoid leakage.
Step 7 - Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed.
Step 8 - After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harness. If the car has diagnostic trouble codes, they will need to be cleared.
Must Know Before Buying:
The following information is for instructional and guidance reference only. We try and make them as accurate as we can.
If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below.
If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks.
Items that have been installed, altered or contaminated are non-returnable.
1. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty.
2. 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return.
The Price, Quality & Functionality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.
| Item Specifics | |
|---|---|
| Brand | PMT2018 |
| Manufacturer Warranty | 1 Year |
| Sensor Type | Oxygen Sensor |
| Other Part Number | 250-24455 |
| Superseded Part Number | 234-4530 |
| Fitment Type | Direct Replacement |
| Sensor Type | Heated |
| Automotive Color / Finish | Steel |
| Thread Size | M18 |
| Universal Or Specific Fit | Specific |
| Output Signal Range (V) | 0.2 To 0.8 Volt |
| Attachment Method | Screw-On |
| Pin Quantity | 4 |
| Terminal Type | Blade |
| Position | Upstream |
| Manufacturer Part Number | P129308MA578ET |
| Type | Sensor |
| Features | Direct Fit |
Payment
We accept all ebay payment!
Shipping
1. Items will be shipped within 24 hours after getting your verified payment.
2. 2.US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time
Returns
Feedback
We will leave positive feedback to buyer as soon as buyer pays for the item. Leaving Negative feedback or Netural Feedback is never a good way to resolve problem .We hightly appreciate that you can refer to us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible.
Shop Category Picture
Hot Item
|
Downstream O2 Oxygen Sensor for Volvo S80 S60 XC60 V50 XC70 XC90 Land Rover LR2
We accept all ebay payment! 1. Items will be shipped within 24 hours after getting your verified payment. 2. 2.US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time We stand behind every product we sell. All of our brand new items come with a 30-Day money-back or exchange guarantee. We will leave positive feedback to buyer as soon as buyer pays for the item. Leaving Negative feedback or Netural Feedback is never a good way to resolve problem .We hightly appreciate that you can refer to us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible. All rights reserved. |
||||||||||||||||||||||||||||||||||
