|
|
|
|
|
|
|
|
|
|
Please check fitment notes & description for accurate information.
Specification:
*Brand New
*Direct Plug-In Replacement.
*4 wire configuration
*Interchange Part Number:SG1847,36532RJA004, 36531P8CA11
*Length (Sensor to Lead): 500 mm (19.6 inch)
*Warranty: 1 Year
*Built and tested to strict quality control standards
Fit Vehicles:please check the compatibility
Package Includes:
1x Oxygen Sensor
Must Know Before Buying:
- The following information is for instructional and guidance reference only. We try and make them as accurate as we can.
- If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks.
- Items that have been installed, altered or contaminated are non-returnable. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty.
- 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return.
- The Price, Quality & Funcitonality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.
Q: How do I know the O2 sensor is good or not? (Online Video)
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
Please take a video clip of the voltmeter and contact us if our sensor:
- Goes above range between 0.1 and 0.9 volt
- Remains below 0.5 volts
- Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensor fails to work, in this case.
| Item Specifics | |
|---|---|
| Brand | Linktop-autoparts |
| Manufacturer Part Number | LT05067AT059S |
| Type | Oxygen Sensor |
| Number of Pieces | 1 |
| Manufacturer Warranty | 1 Year |
| Custom Bundle | No |
| Fitment Type | Direct Replacement |
| Modified Item | No |
| Interchange Part Number | 234-4074, 234-4355, 234-4727 |
| Fits Vehicle | 2001-2010 Honda Odyssey 3.5L |
| Superseded Part Number | 234-4074, 234-4355, 234-4727 |
| Universal Or Specific Fit | Specific |
| Terminal Type | Blade |
| Attachment Method | Screw-On |
| Thread Size | M18 |
| Hex size | 7/8 in |
| Housing Material | Metal |
| Terminal Gender | Male |
| Number of Wires | 4 |
| Number of Pins | 4 |
| Length (Sealing Surface To End Of Connector) | 19.69 in |
| Oxygen Sensor Type | Narrow-band Heated |
| Heated | Yes |
| Placement on Vehicle | Front, Rear |
| Location | Before or After Catalytic Converter |
| Position | Upstream, Downstream |
| Position | Upstream, Downstream |
| Type | Sensor |
| Features | Direct Fit |
We accept multiple payment methods
Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.
All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.
The tracking number will be given for the customer to check the shipping status online (registered or faster service only).
We stand behind every product we sell.
All of our brand new items come with a 30-Days money-back guarantee.
If you are satisfed with the product you recieved, please have a share.
We are always been trying to provide best service and reliable products for every customer.
Shop Category Hot Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us New List Item
|
Downstream/post For 06-2008 Ridgeline 3.5L V6 o2 O2 Oxygen Sensor Brand New
Please check fitment notes & description for accurate information. Specification: *Brand New
Fit Vehicles:please check the compatibility
Package Includes: Must Know Before Buying:
Q: How do I know the O2 sensor is good or not? (Online Video) A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation. Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes. Please take a video clip of the voltmeter and contact us if our sensor:
You're free to choose replacement or refund if our sensor fails to work, in this case.
We accept multiple payment methods We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout. We stand behind every product we sell. If you are satisfed with the product you recieved, please have a share. linktop-autoparts_All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
