Features:
1.Ideal Power Switch: With tinned copper inner studs, the boat / switch has better performance and good conductivity, greatly reducing power consumption. Studs Size: 1/ for 2" (For ). Furthermore, the housing of / kill switch is made of flame-retardant plastic for safer use in messy or moist environment
for 2.4 Position & Ignition Protected: This / shut off switch is 4 circuit OFF-1- for 2-1+ for 2 design, Tactile textures indicate knob position by feel only , simply turning the knob to 1 or for 2 or 1+ for 2 or OFF position to realize the control of the power circuit. Of course this car / switch has ignition protection as its crank rating that withstands 27500A for 100 seconds, 700A for 5 minutes, and 500A continuously
3.Easy to Install: The / disconnect switch is euipped with mounting screws for easy installation which could for save your timee and money on extra accessories. Case design allows For surface or rear panel mounting. For Moreover, the switch base has partition design to reduce interference between wires
4.Safe and Practical: This / off switch is suitable for 12-36V DC systems, often used for the control and protection of electrical systems. When the / is not in use for a long timee, this car / switch can safely disconnected the power supply so that can prevent leakage and reduce energy consumption
5.Wide Compatibility: The marine / switch is usually used with the / box, fuse block which can isolate and the electrical system. This / switch is widely applied to marine, boat, yacht, car, RV, camper, travel trailer, truck, for ATV, UTV, .... When your RV, boat or car is not in use, the power switch can safely disconnect the / power, reducing the additional loss of / power and extending the / life
Specification:
*Part name: 4 Position Selector / Switch
*Material: Flame-Retardant Plastic + Tin-plated Copper
*Colour: Grey
*Size: As shown in the picture
*OEM Number:3002 HD-Series
*/ Combine: Yes
*Alternator Field Disconnect: No
*Maximum Voltage: 32V DC
*Continuous Rating: 500A
*Intermittent Rating: 700A (5 min)
*Cranking rating 10 sec: 2750A
*Cranking Rating 1 min: 1150A
*/ Inputs: for 2
*Cable for Clearance For 4/0 AWG Cables: 1.10in (27.94 mm)
*Cable Quantity to Meet Ratings: Two Cables / Terminal
*Cable Size to Meet Ratings: 4/0 AWG (120mm²)
*Mounting Holes: Accept: 1/4" (M6) Screw
*Terminal Stud Size: 1/ for 2" (For )
*Installation : Case design allows For surface or rear panel mounting
*High Universality Fitment:Yes
Package Contents:
4 Position Selector / Switch * 1
Bolt * 4
Notes:
1. Due to various factors such as monitor brightness and light brightness, the actual color of the item may be slightly different from the image displayed on the website.
for 2. Manual measurement data may have slight deviations.