? Seat Belt Repair ? SRS Module Reset ? Seat Belt Webbing Replacement ?
Service Description
If your vehicle has been in an accident, there's a good chance the airbags and seat belts have deployed. When this happens, your airbag control module will store SRS codes and crash data, causing the airbag light to come on. In order for the module to function normally again, you will need to mail it in for a crash data reset.
At Seat Belt Masters, we offer an airbag control module reset service to clear all crash data and restore your module back to factory condition. With over 20 years of industry experience, you can count on us to help you clear the SRS light on your dash. Using our proprietary module reset software, we'll ensure that no crash data is left behind and that your module will be as good as new.
Airbag Module Reset Compatible With:
ALL MAZDA MODELS 2000 and UP
This is an airbag control module crash data reset listing compatible with all Mazda models manufactured from 2000 and up.
We're here to help you!
Some advanced airbag modules that store the crash data within the processor require a Tier 2 repair upgrade fee to successfully clear the SRS module of any crash data. In the event that this occurs, there will be a charge of $20 added to the reset cost. You're more than welcome to inquire beforehand to see if your reset will require a Tier 2 service. To do so, please message us a picture of the label on the SRS module and we'll promptly get back to you.
NOTICE for Mazda SRS Modules:
Some newer Mazda SRS modules may require a Tier 3 SRS Module Reset. These units are very advanced and require much more time/labor/software to be successfully reset. They require our Tier 3 level service which is priced at $149.99 per module. Example modules include the following part numbers: KMV657K30, N45257K30B, KEAD57K30C. If you have any questions concerning price/compatibility, please let us know. The Tier 3 SRS Reset Listing can be found here:
Tier 3 SRS Module Reset Service
Compatibility Questions? Contact Us
Try us out today and see how easy our service is!
Add the necessary repairs to your shopping cart. We have a variety of other SRS services you can check out on our eBay store. After selecting the repairs needed, you can now place the order. eBay will send an Order Confirmation Receipt that you can print out to include with your parts. Use a suitable box and adequate packaging material to help keep your parts secured during shipment. Finally, mail your package over to our repair facility to the address below where we'll receive it, complete repairs within 24 hours, and ship it back to you.
? Our Shipping Address ?
Seat Belt Masters
1010 Memorial Ave.
West Springfield, MA 01089
To Expedite Order Processing, Please Include the Following Info With Your Package:
- A Copy of Your eBay/PayPal Order Confirmation Receipt*
- Your Contact Information (Name, Phone, Return Address, and Email)
- Year, Make, and Model of the Vehicle (VIN is Optional)
*If you cannot print the Order Confirmation Receipt, please jot down the Order Confirmation Number inside the package.
Crash Course on Airbag Modules
The airbag control module is basically the "brains" of the entire airbag system. Also known as an airbag computer, it is in charge of all SRS functions, storing SRS codes, and logging crash data history in the event of an accident. During normal operation, the airbag control module is constantly monitoring data from various sensors and systems throughout the vehicle. Some of this information can include vehicle speed, occupant detection, brake use, deceleration force, seat belt use, and more. As soon as impact is detected, the airbag control module will make a split-second decision on which SRS components to deploy, if any, based on the data it receives.
The airbag system on your vehicle is critically important in protecting you and your passengers during an accident. An illuminated airbag light indicates that there is a problem with your airbag system and may disable SRS functions. It is not advisable to operate your vehicle with your airbag light on. All active SRS faults will need to be addressed (e.g. if your seat belt is deployed, it will also need to be sent in for a repair, if your impact sensor is damaged, it will need to be replaced, etc.). Resetting your airbag module will not override existing SRS faults, the codes will return until they are addressed. The best way to determine which SRS codes/faults you have is to scan the vehicle with an OBD2 scan tool.
Check out our FAQ Section to better understand the difference between crash data and SRS codes.
Depending on the vehicle manufacturer, the airbag control module can go by different names, such as:
- Supplemental Restraint Unit (SRS Unit)
- Restraint Control Module (RCM)
- Airbag Control Module (ACM)
- Airbag Electronic Crash Unit (Airbag ECU)
- Sensing Diagnostic Module (SDM)
- Sophisticated Airbag Sensor (SAS)
- SRS Control Module (SRSCM)
Airbag Control Module Location
If you still need to remove the airbag control module from your vehicle but don't know where it's located, this guide can help! Listed below are the top three locations where you may find the airbag control module in your vehicle.
Airbag Module Removal Tip: Try doing an online search on how to remove the airbag control module from a vehicle similar to yours. There's a good chance that someone has already done it in the past and documented it in a forum post, photo guide, or video tutorial. Do at your own risk! We cannot speak to the credibility of these tutorials. When in doubt, we always recommend following the service manual guide on removing the airbag control module. Common industry practice is to always have the battery disconnected when removing/installing SRS components. Yellow connectors will generally indicate that a component is part of the SRS (Supplemental Restraint System).
Any tampering of the SRS Unit before or after the reset will void our included warranty. We do not work on flooded modules. Modules that are physically damaged (broken connectors, damaged casing, etc.) are subject to a rejection of repairs.
Common FAQ's:
Why should I get my airbag module reset?
A new airbag control module can cost you hundreds of dollars, take up to several weeks to come in, and will generally require costly VIN programming. When you reset your original airbag control module with us, you'll be saving yourself a lot of time and money. We offer a 100% Satisfaction Guarantee, 24 hour turnaround, 1-3 day return shipping, and excellent customer support. Why wouldn't you want to use this service!
Try us out today and see why customers from all over the country are using Seat Belt Masters!
How long will the entire process take?
The entire time frame for our service, start to finish, largely depends on the carrier speed. Most orders we receive are repaired and shipped back in 24hrs; sometimes shipped back the same day. In general, you can expect your parts back 3-7 days from when you ship it to us.
Outstanding balances or any other order-related issues can cause a delay. We will do our best to contact you in this case.
A tracking number will be provided for all shipments.
What's the Difference Between SRS Codes and Crash Data?
SRS codes will generally point to active or current SRS faults found in the vehicle. This includes deployed seat belts, damaged sensors, wiring issues, etc. Most of the time, you can see a high/low resistance or open/short circuit description for these components.
Crash data is permanent history that gets stored in the airbag control module after an accident. It is encoded in complex format that cannot be cleared or read by ordinary OBD2 scan tools. You may only get a generic description outlining the data as STORED or HISTORY codes.
Though it's not always the case, a flashing SRS light is indicative of SRS codes, whereas a solid SRS light is indicative of crash data history.
What is an OPDS or OCS Unit?
If you scan your vehicle with an OBD2 scanner, you may come across an OPDS or OCS code. The OPDS (Occupant Position Detection System) or OCS (Occupant Classification System) generally refers to a sensor, or a series of sensors, located in the front passenger seat. The primary purpose of this system is to detect the presence of a passenger to help determine whether or not to deploy the passenger airbags or seat belts.
This is genearlly related into the "Passenger Airbag OFF" indicator light that you may see on your control panel. If you are getting codes for the OPDS/OCS unit, it may need to be re-calibrated. This is generally done with an OBD2 scan tool.
Can you provide me with a receipt for salvage inspection?
Bought a salvage title vehicle from the auction? Chances are, you may have to undergo a salvage inspection with receipts proving all major repairs/replacements. We can provide you with a formal company repair receipt if necessary. Just let us know!
Can I send multiple parts in one box?
Yes, of course! Just make sure to package your parts securely to avoid any damages during shipping.
Have Other Questions? Please Contact Us!
Click Here: Seat Belt Masters eBay Store
Other Services We Offer:
