Fitment
For Chevrolet:
2010-2014 Express 1500 4.3L
2010-2016 Express 2500 4.8L 6.0L
2010-2016 Express 3500 4.8L 6.0L
2016 Express 4500 6.0L
For GMC:
2010-2014 Savana 1500 4.3L
2010-2016 Savana 2500 4.8L 6.0L
2010-2016 Savana 3500 4.8L 6.0L
Attributes
Brand:TEMBOR
Condition:New
Manufacturer Warranty:1 Year
Type:Electrical
UPC:Does not apply.
Gasket or Seal Included:Yes
In Tank or External:In Tank
Outlet Quantity:3
Outlet Type:Quick Connect
Strainer Included:Yes
Note:with Left Side Rear Hinged Door
Average Current Draw:11 Amp
Average Flow Rating:21 GP
Connector Gender:Female
Connector Quantity:1
Connector Shape:Oval
Drive Type:Electrical
Fuel Sending Unit Included:Yes
Fuel Type:Gasoline
Housing Material:Plastic
Inlet Type:Strainer
Internal Or External Strainer:Internal
Items Included:Fuel Filter
Negative Ground:No
Outlet Outside Diameter:0.375 IN
Pressure:58-80 psi
Resistance Ohms:40-250 Ohm
Terminal Gender:Male
Terminal Quantity:4
Terminal Type:Blade
Voltage:12 V
Engine:V6 4.3L, V8 4.8L, V8 6.0L
Model 1:Express 1500, Express 2500, Express 3500
Model 2:Savana 1500, Savana 2500, Savana 3500
Key Benefits
- Designed for optimal performance and reliability, ensuring your vehicle runs smoothly.
- Compatible with various models, making it a versatile choice for replacement needs.
- Features an internal strainer and included fuel filter to maintain clean fuel flow.
- Constructed with durable plastic housing for longevity in harsh operating conditions.
Installation Guide
- Ensure that the vehicle is parked on a flat surface and the ignition is turned off before beginning installation.
- Disconnect the battery to prevent any electrical issues during the installation process.
- Remove the old fuel pump assembly carefully, following your vehicle's service manual for procedural steps.
- Install the new fuel pump assembly (E4048M) in the tank, ensuring all connections are secure and aligned.
- Reconnect the battery and test the new pump for proper operation before reassembling any panels or covers.
Important Notes
- This fuel pump assembly is designed for gasoline fuel types only.
- The average current draw is 11 amps, and it is essential to ensure that your vehicle's electrical system can support this requirement.
- The pressure rating is between 58-80 psi, make sure this is compatible with your vehicle specifications.
- Fuel sending unit is included; verify compatibility with your model before installation.