Note!!!:
Fitment system may not be 100% accurate, if you are not sure which bulb size you need, please check vehicle manual or stock bulb model.
Headlight Specification:
● Bulb Socket: H7 high beam + H7 low beam
● Chip Type: CSP Bridgelux chips, 360 degree clear beam no blind zone
● Technology: Bulit-in driver & cooling fan
● Operating Voltage: DC 9V ~ 32V , Fit for 12V / 24V vehicle.
● Wattage: 80W per bulb
● Luminous Flux: 16000 LM per set
● Color temperature: 6000K
● Light color: Cool White
● Material: Aviation 6063 aluminum profile
● Beam Angle: 360 degree
● Operating Temperature: -40 - +80 degree Celsius
● Waterproof Rate: IP67 rated Waterproof and dust seal, works well even in extreme weather
● Lifespan: over 50000 hours life time, stable quality and long service life
● Application: headlight high beam + low beam
● Built-in constant current CPU,instant full brightness without start-up relay
● Easy plug and play design, no resistor or modification needed.
Two-way Heat Dissipation Channel:
1. All-in-one aluminum profile as heat conduction system, 360 degree heat radiating.
2. Built-In Turbo Cool Fan, High speed 12000 r/min, high air flow for faster cooling rate.
Foglight Specification:
Plug Type: H11/H8 (fog light)
Chip Type: 4 sides COB Chips
Luminous Flux: 8000LM/set (4000LM/bulb)
Operating Voltage: DC 12-24V
Wattage: 40W/bulb
Color Temperature: 6000K White
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: Fog light
Package Included:
2pcs H7 Headlight High Beam Bulbs
2pcs H7 Headlight Low Beam Bulbs
2pcs H11 Fog Light Bulbs
New and old boxes are shipped randomly
Features:
☆100% brand new/never used and well packaged retail box
☆The replacement bulbs are engineered for superior performance, exceptional looks, andincreased safety.
☆White light reflect road paint/signs better to show clearer road situation during night driving
☆Mini ultra-light design, as much as possible to restore the original size of the car, adapt to all models, plug and play. High efficiency CSP light source, low energy consumption and high brightness.
☆The light effect boundary is clear, and there is no stray or glaring light, which has made a great contribution to the safety of the driver.
☆The model is the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required Energy saving, environmental protection, Stable performance, through strict test,safer driving in the car
☆High-quality aluminum heat dissipation ensures a safe temperature range
☆Built-In Cooling Fans ,Smart Efficient Cooling System Fast Heat Dissipation
☆Low Power Consumption than Halogen bulb, Energy Saving
☆Operating Temperature: -40°C ~ +80°C
☆Shockproof and durable for up to 50,000 hours
☆Color Temperature:6000K White
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
Contact Us:
Please contact us first before you leave a negative feedback, we will try our best to solve problem for you. Thanks.