Features
100% new components and manufactured from high quality, durable material for extended life.
Quality tested to ensure easy installation, optimal performance, and enhanced durability.
Features Anti-Pinch technology (where applicable) – Safety feature reduces risk to passenger.
Built to meet or exceed your vehicles requirements for fitment, structural configuration, strength, and torque.

Specification

Position: Front Left, (Front Driver Side)

Motor Included: with Motor

Attachment Type: Bolt On

Electric/Manual: Electric

Material: Metal and Plastic

Gear Material: Plastic

Package Quantity: 1

Packaging Type: Box

Fitment: Direct Replacement

Interchange Part Number: 80721-1KA0A 751-438

Note: Motor with 2 Pins

Compatibility

For Nissan Juke 2011-2017

Package
1pcs Power Window Regulator

Install the window regulator as follows: 

Part1 Disconnecting the Window from the Motor

1.Remove the interior door panel.   

2.Gently remove the plastic door cover. 

3.Locate the window mounting bolts.  

4.Move the window if necessary to access the bolts. 

5.Remove the bolts while a friend supports the window.  

6.Raise the window up into the door frame. 

7.Use masking tape to secure the window in place. 

Part2 Disconnecting the Motor and Regulator

8.Remove the window regulator bolts.  

9.Locate and remove the window motor mounting bolts.

10.Disconnect the motor wiring harness connector.  

11.Remove the motor and regulator through the access port. 

12. Connect the regulator to the new motor. 

Part3 Installing a New Power Window Motor

13.Slide the new motor and regulator back into place.  

14.Replace the mounting bolts. 

15.Reconnect the electrical connector.   

16.Remove the masking tape and lower the window back down. 

17.Insert the window mounting bolts.   

18.Reinstall the plastic liner and interior panel.