|
|
|
|
|
|
|
|
|
|
|
|
For PONTIAC WAVE 2005 - 08 PONTIAC G3 2009 - 2010 Brake Front Vented Disc Rotors
Specification:
Brand：sinwonparts
Fitment:
0
NOTE:
Brake pads are a normal wear item on your vehicle. That means they are designed to wear down and be replaced. If you have disc brakes on your vehicle, this is a very manageable task and only requires a few tools.
Essentially, hydraulic pressure forces a piston against the brake pads set inside the brake caliper. The caliper is free floating so that the pressure from the pads is evenly applied to each side of the brake rotor to slow or stop the wheel. The rotor is connected to and spins with the wheel and hub. The friction of repeated stopping will wear down the brake pads. The rotor wears as well, but the pads wear much faster.
If you notice any squealing or scraping noises while driving your vehicle and applying your brakes, that is a good sign that your pads are worn and in need of replacement. You might also hear squealing or scraping sounds while NOT applying the brakes and when you apply the brake, the noises stop. That is also an indicator of worn or misaligned pads.
Before starting, make sure your vehicle is parked on a flat level surface and you have your parking brake set. This is to make sure your vehicle doesn't roll off the jack which could be quite dangerous. If you do not have a floor jack or a breaker bar that fits your wheel's lug nuts, you can use the scissor jack and tire iron that came with your vehicle...they will work just fine for this. If you do use a breaker bar with a socket, make sure it is the correct size for the lug nuts otherwise you could round off the corners and make removal difficult. I do recommend buying a set of jack stands in either case because they are pretty cheap and provide much more safety for you when your vehicle is elevated off of the ground.
Before jacking up the vehicle, you can use your tire iron or breaker bar to break loose the lug nuts on the wheel. This is much easier and safer while the car is firmly on the ground because it might require a decent amount of force to loosen them. If you have difficulty, try to position yourself to use your own body weight to help loosen the lug nuts.
Using your floor jack or scissor jack, elevate the vehicle using the jack points defined in your vehicle manual. Once the wheel is clear of the ground, place your jack stand in position to support the vehicle. If you are using a hydraulic floor jack, you MUST use a jack stand as the floor jack will tend to "sink" over time. A scissor jack is less likely to move, but I still recommend jack stands...better safe than sorry.
With the wheel safely off the ground, go ahead and remove the lug nuts. After they are removed, you can slide the wheel off of the hub and set it aside. You now have access to the rotor and brake caliper.
| Item Specifics | |
|---|---|
| Brand | sinwonparts |
| Manufacturer Part Number | sinwon164199 |
| Vehicle Location | Front,Left,Right |
| Warranty | 1 Year |
| Disc Surface Finish | Coated & Polished |
| Fitment Type | Direct Replacement |
| Items Included | 2X Brake Discs/ Rotors |
| Interchange Part Number | 55099 brake rotors disk |
| Solid Or Vented Rotor | Vented |
| Rotor Outside Diameter | 10.00in. (254.0mm) |
| Center Hole Diameter（mm) | 59 |
| Bolt Hole Quantity | 6 |
| Brake rotor thickness(mm) | 24 |
| Type | Brake Disc Rotor |
| Plate Thickness（mm) | 24 |
| Plate minimum thickness | 22 |
| Item Height（mm) | 41 |
| Other Part Number | driver passenger side Front rotor brake discs Kit |
Shop Category Hot Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us New List Item
|
For PONTIAC WAVE 2005 - 08 PONTIAC G3 2009 - 2010 Brake Front Vented Disc Rotors
For PONTIAC WAVE 2005 - 08 PONTIAC G3 2009 - 2010 Brake Front Vented Disc Rotors
Specification:
Brand：sinwonparts
Fitment:
0
NOTE:
Brake pads are a normal wear item on your vehicle. That means they are designed to wear down and be replaced. If you have disc brakes on your vehicle, this is a very manageable task and only requires a few tools. If you notice any squealing or scraping noises while driving your vehicle and applying your brakes, that is a good sign that your pads are worn and in need of replacement. You might also hear squealing or scraping sounds while NOT applying the brakes and when you apply the brake, the noises stop. That is also an indicator of worn or misaligned pads. Before jacking up the vehicle, you can use your tire iron or breaker bar to break loose the lug nuts on the wheel. This is much easier and safer while the car is firmly on the ground because it might require a decent amount of force to loosen them. If you have difficulty, try to position yourself to use your own body weight to help loosen the lug nuts. Using your floor jack or scissor jack, elevate the vehicle using the jack points defined in your vehicle manual. Once the wheel is clear of the ground, place your jack stand in position to support the vehicle. If you are using a hydraulic floor jack, you MUST use a jack stand as the floor jack will tend to "sink" over time. A scissor jack is less likely to move, but I still recommend jack stands...better safe than sorry. With the wheel safely off the ground, go ahead and remove the lug nuts. After they are removed, you can slide the wheel off of the hub and set it aside. You now have access to the rotor and brake caliper.
☆ We will only ship to the confirmed shipping address given with the payment.
☆ Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
☆ All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.
☆ We ship the package to your shipping address in eBay. Please tell us your shipping address if it is different from the one in eBay.
☆ The tracking number will be given for the customer to check the shipping status online (registered or faster service only).
☆ We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.
☆ We stand behind every product we sell.
☆ All of our brand new items come with a 30-Days money-back guarantee.
☆ We define the item as defective only if it doesn't function as described.
☆ It is the buyer's responsibility to understand the item description before bidding.
☆ All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
☆ Man-made damage by abuse or wrong operation is not covered by this warranty.
☆ No product liability insurance is assumed.
☆ We are always been trying to provide best service and reliable products for every customer.
☆ If you are satisfed with the product you recieved, please have a good share.
☆ If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback. Please feel free to contact with us, we will try our best to reslove any problem for you.
SINWONPARTS All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
